Wire Duct, Wire Trough, Wireway

1-1/2" x 1-1/2" Wire DuctWide Slot Wire Duct. H x W x L: 1-1/2" x 1-1/2" x 6'. Color: White. 7.62mm Slots.

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 1 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

Used for closing off open ends of the 4x4 hinged channel. No coupler required. Push-on installation.

Category: Wireway Closure Plates

Panduct® type G wide slot wiring duct, 4 W x 3 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4OR, S4X4OR6 or E4X4OR6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

2in x 2in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Orange

Category: Wireway U-Connectors

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C2BL6. Extra supports required when used in horizontal applications. Cover sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

The Panduct PanelMax 3 replacement cover in white is used with the DRD33 DIN Rail Wiring Duct. It is made of PVC material, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Panduct® type HN hinged cover narrow slot wiring duct, 3 W x 3 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

The electro zinc-plated vertical wall mount bracket in silver is .33" (8.4 mm) high, 1.5" (38.1 mm) long, and 1.69" (42.9 mm). It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" or (12 mm) threaded r

Category: Wire Duct Clips / Retainers

4in x 4in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Yellow.

Category: Wireway U-Connectors

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.

Category: Wireway Closure Plates

Panduct® flush cover type D round hole wiring duct, 4 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

CHANNEL SOLID WALL MTG. HOLES 4 X 4

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 1 W x 3 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The electro zinc-plated bracket in silver 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 4IN H EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD WALL MOUNT 18-30IN EZ EA

Category: Wire Duct Clips / Retainers

Narrow Slot Wire Duct, 1" x 4" x 6', PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

3" x 1" Wire Duct, Limited Quantities AvailableNarrow Slot Wire Duct. H x W x L: 3" x 1" x 6'. Color: White. 5mm Slots.

Category: High Density Wire Duct

Spill-Over Junction with 2x2 Exit. Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channel, spilling over the side into a 2x2 vertical exit. Requires coupler to attach 2x2 FiberRunner® and fittings to the vertical exit. Mounts directly to existing ins

Category: Wireway Box Connectors

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Yellow.

Category: Wireway Elbows