Search results

Wireway, Seal Plate, 90 Deg, Bulletin F10 (lay-in Type 12 Wireway), Size/dims: 6.00x6.00, Material/finish: Steel/zinc

Category: Wireway Angled Sealing Plates

Panduct® type NNC halogen-free metric wiring duct, 25mm W x 75mm H x 2M length, halogen-free, white.

Category: Standard Density Wire Duct

Divides wireway into two or three compartments in washdown applications. This Barrier Kit 3-Compartment, F66BB3C item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Barrier Kits

Wireway, Seal Plate, Qr, Bulletin F10 (lay-in Type 12 Wireway), Size/dims: 6.00x6.00, Material/finish: Steel/zinc

Category: Wireway Tee Fittings

Slotted Wall Wiring Duct, 2" x 2", Non-Adhesive, PVC, Black, 120ft/Carton

Category: Standard Density Wire Duct

IMC/Rigid Conduit Pull Box Gasket, Cover Type Screw-On, Trade Size 1 Inch, Length 12 Inch, Approval UL 514A, Used On IMC/Rigid Metal Conduit

Category: Wireway Gaskets

Halogen Free Slotted Wiring Duct, 1" x 4" x 6', White, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wire Duct Cover, .97" Wide x 6' Long, Gray, Halogen Free

Category: Wire Duct Covers

Feed-Through Telescope Fittings are for adjusting wireway length without cutting or welding. This Telescope Fitting Feed-Through, F66WASS item measures 6.00x6.00 inches with a material of SS304 finish Brushed.

Category: Wireway Telescope Fittings

Slotted Wall Wiring Duct, 1.5" x 1.5", Non-Adhesive, PVC, Gray, 120ft/Carton

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 2 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Fiberglass Feed-Through, Cut-off fittings are used for custom fit lengths. This Cutoff Fitting Feed-Through, F66WXFG item measures 6.00x6.00 inches with a material of Fiberglass colored Gray.

Category: Wireway Cutoff Fittings

Narrow Slot Wiring Duct, Lead-Free PVC, Light Gray, Size: 2-1/2 Inch Wide, 3 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® Type G Wide Slot Wiring Duct, 3" W x 3" H x 6' L, PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wiring Duct Cover for 1-1/2" Duct, 6 ft Long, PVC, White, 120 ft/carton

Category: Wire Duct Covers

Wiring Duct Cover for 3" Duct, 6 ft Long, PVC, White, 120 ft/carton

Category: Wire Duct Covers

Wireway Closure Plate, 4 x 4 Inch, Type 12 Feed-Through, Stainless Steel, No Knockout

Category: Wireway Closure Plates

Stainless Steel, Feed-Through Tees are used for making T-type turns in wireway runs. This Tee Feed-Through, F44WTSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Tee Fittings

Feed-Through Telescope Fittings are for adjusting wireway length without cutting or welding. This Telescope Fitting Feed-Through, F44WASS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Telescope Fittings

Wireway Straight Section, Bulletin F22 (Stainless Steel Feed-through Type 4x Wireway), Size/dims: 4.00x4.00x24.00, Material/finish: Ss Type 304

Category: NEMA 4X Wire Trough

Noise Shield, 4" High, 3' Long

Category: Wall Duct Dividers

Panduct® Type F Narrow Slot Wiring Duct, White, 4" x 3" x 6', SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® Type G Wide Slot Wiring Duct, 2 W x 1 H, 6' Length, PVC, Light Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Nema 4X Stainless Steel Wireway, Size/dims: 6.00x6.00, Material/Finish: Stainless Steel. For use with Lay-in Type 12 Wireway .

Category: Hinged Cover Wireway