Search results

FIBERDUCT FITTINGENDCAP 2INX2IN OR EA

Category: Wireway Closure Plates

PAN PED6 PATCHRUNNER HIGH CAPACITY 6.1 (155MM) D

Category: Special Purpose Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 2 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

OVERHEAD BRACKET TRAPEZE 12IN EZ EA

Category: Wire Duct Clips / Retainers

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2BL or FIVRA4X4BL to change level of straight horizontal runs. Cover included.

Category: Wireway Elbows

The Panduct PanelMax 4 replacement cover in white is used with the DRD44 DIN Rail Wiring Duct. It is made of PVC material, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Orange.

Category: Wireway Closure Plates

Panduct® type F narrow slot wiring duct, 1.5 W x 4 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2YL or FIVRA4X4YL to change level of straight horizontal runs. Cover included.

Category: Wireway Elbows

Duct cover, 37mm W x 2M length, PVC, white.

Category: Wire Duct Covers

2 x 2 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Black.

Category: Wireway Closure Plates

Duct cover, 4 W x 6' length, PVC, orange, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C2BL6. Extra supports required when used in horizontal applications. Cover sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

The Panduct PanelMax 3 replacement cover in white is used with the DRD33 DIN Rail Wiring Duct. It is made of PVC material, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Panduct® type F narrow slot wiring duct, 1 W x 1 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a horizontal four way cross intersection. Cover included. Yellow.

Category: Wireway Cross Fittings

4in x 4in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Yellow.

Category: Wireway U-Connectors

Used for closing off open ends of the 4x4 hinged channel. No coupler required. Push-on installation.

Category: Wireway Closure Plates

2in x 2in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Orange

Category: Wireway U-Connectors

Panduct® flush cover type D round hole wiring duct, 4 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 1 W x 3 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.

Category: Wireway Closure Plates

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4OR, S4X4OR6 or E4X4OR6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers