Search results

The quick mounting clip is used for installing the CWD2 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not included).

Category: Wire Duct Clips / Retainers

HOF PWMR5 WIRE MANAGEMENT RAI

Category: Wire Duct Clips / Retainers

Snap rivet fastens channel and fittings together for added strength and rigidity. Snap rivet mounts flush to surfaces, Black.

Category: Wall Duct Panel Rivets

Divider wall with screws for integral cabinet top cable routing system to enhance cable management. For 800mm wide cabinet. Color: Black

Category: Wall Duct Dividers

Eaton B-Line series open frame racks, 11 Gauge steel, 1/2"-13 thread size, Yellow zinc, 2" X 9/16" Tabbed framing clip

Category: Wire Duct Clips / Retainers

AUS AB7.7512DIVGMOD 7.75IN X 12IN DIVIDER GRAY

Category: Wall Duct Dividers

AUS AB7.7560DIVGMOD 7.75IN X 60IN DIVIDER GRAY

Category: Wall Duct Dividers

PANTHER INDUSTRIES 3/4IN X 10FT 24GA GALV HANGER IRON COIL

Category: Wire Duct Clips / Retainers

2" Corner Strip For PanelMax™ DIN Rail Wiring Duct

Category: Wire Duct Clips / Retainers

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 3" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

TG raceway divider wall. Snaps onto rails in TG raceway rase to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

TG raceway divider wall. Snaps onto rails in TG raceway base to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 4" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 4" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

Electro zinc plated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET CANTILEVER 18IN EZ EA

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

OVERHEAD SPLCONNECTOR 24IN -30IN EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD STRUT KIT EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 6IN H EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high, 4.67" (118.5 mm) long, and 1.12" (28.5 mm) wide. It quickly joins two 24" (610 mm) or 30" (762 mm)] wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the pai

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2"" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers