Search results

The black powder coated straight splice connector is 1.57" (39.8 mm) high, 4.67" (118.5 mm) long, and 1.12" (28.5 mm) wide. It quickly joins two 24" (610 mm) or 30" (762 mm)] wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the pai

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2"" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers

The black powder coated bracket strut mounting clip assembly in black is 2.27 (57.7 mm) high, 6.50 (165.1 mm) long, and 1.96 (49.8 mm) wide. It allows the Wyr-Grid ® Pathway to be attached directly to standard 1.63 (41.4) wide strut structures. The packag

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 24 (609.6 mm) wide Wyr-Grid ® Pathway from the ceiling using a pair of 1/2 (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on intersection bend radius control is 6.0" (152 mm) high. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees, crosses, or right angle intersections. It comes

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

The pre-galvanized metal divider wall in gray is 2.0" (50 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 18" (457.2 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 20.7" (525.8 mm) long, 2.2" (56.4 mm) wide, and 20.7" (525.8 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The pre-galvanized metal divider wall in gray is 6.0 (152 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

The black powder coated bracket is 2.41" (61.2 mm) high, 21.0" (533.4 mm) long, 2.04" (51.8 mm) wide, and 21.0" (533.4 mm) deep. It is designed to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 12IN EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD SPLCONNECTOR 12IN -18IN EZ EA

Category: Wire Duct Clips / Retainers

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

The electro zinc-plated vertical wall mount bracket in silver is .33" (8.4 mm) high, 1.5" (38.1 mm) long, and 1.69" (42.9 mm). It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" or (12 mm) threaded r

Category: Wire Duct Clips / Retainers

The electro zinc-plated bracket in silver 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 4IN H EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD WALL MOUNT 18-30IN EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes i

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 12" (304.8 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in

Category: Wire Duct Clips / Retainers