Search results

Wiring Duct Wire Retainer, Type G/H, for 3 Inch Wide Panduct, 2 to 4 Inch High, ABS Material, Black

Category: Wire Duct Clips / Retainers

Wiring Duct Wire Retainer, Type G/H, for 2 Inch Wide Panduct, 2 to 4 Inch High, ABS Material, Black

Category: Wire Duct Clips / Retainers

Divider Wall Mounting Base, Panduct

Category: Wall Duct Dividers

Panduct® type G wiring duct wire retainer, use with 3x5 - 4x5 or 6x4 duct width, use with 3x5 - 4x5 or 6x4 duct height, ABS, black, 100 pc. package quantity.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 12" (304.8 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 14.7" (373.4 mm) long, 2.2" (56.4 mm) wide, and 14.7" (373.4 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high and quickly joins two 8" (203 mm), 12" (305 mm), or 18" (457 mm) wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the paint of adjacent pathway sections to p

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 16.5" (419.1 mm) long, 2.04" (51.8 mm) wide, and 16.5" (419.1 mm) deep. It is designed to support a 12" (304.8 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers

Wiring Duct Wire Retainer, Type G/H, for 4 Inch Wide Panduct, 2 to 4 Inch High, ABS Material, Black

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 4" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high, 4.67" (118.5 mm) long, and 1.12" (28.5 mm) wide. It quickly joins two 24" (610 mm) or 30" (762 mm)] wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the pai

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

The black powder coated bracket strut mounting clip assembly in black is 2.27 (57.7 mm) high, 6.50 (165.1 mm) long, and 1.96 (49.8 mm) wide. It allows the Wyr-Grid ® Pathway to be attached directly to standard 1.63 (41.4) wide strut structures. The packag

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 21.0" (533.4 mm) long, 2.04" (51.8 mm) wide, and 21.0" (533.4 mm) deep. It is designed to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers