"cutler and hammer breakers"

Receptacle Testing, Wire & Cable Tracing, Circuit Breaker Testing, Frequency Rating: 50/60Hz, Voltage Rating: 50V - 1000V, Audible and Visual Alert, Included/Required: (2) 15V AAA Batteries

Category: Voltage & Continuity Testers

The NCVT-4IR provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets, and wires; as well as Infrared (IR) thermometer measurements making it the perfect choice for HVAC professionals.

Category: Voltage & Continuity Testers

Voltage Continuity Tester, UL Certified CAT IV 600V, 0-600V AC/DC, Measures AC/DC Voltage, Low Impedance AC Voltage (Lo Z) (For Ghost Voltage Dissipation), Automatically Identifies AC Or DC Voltage And Determines DC Polarity And Tests For Continuity And GFCI Operation, Backlit Display And Flashlight

Category: Voltage & Continuity Testers

Continuity, Current and Voltage Tester, 100 Amp, 0-600 Volt AC/DC Range, Open Jaw, Includes 4mm Detachable Probes and Instruction Sheet

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Voltage Tester Provides Non-Contact Detection of 70 to 1000V AC in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Non-Tamper-Resistant Outlets and Wires, Durable Tester is Dustproof and Waterproof with an IP67 Rating and 9.8-Foot (3 m) Drop Protection, When Voltage is Detected, a High Intensity, Bright Red LED Illuminates and an Audible Tone Will Sound, GFCI Tester Detects the Most Common Wiring Problems in Standard and GFCI Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Includes NCVT1XT Non-Contact Voltage Tester; RT210 GFCI Outlet Tester, Instructions, and All Required Batteries

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester Detects Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires, High Intensity, Bright Green LED Indicates the Tester is Operational and Aids in Illuminating the Workspace, When Voltage is Detected, a High Intensity, Bright Red LED Illuminates and a Beeping Sound is Generated, Auto Power-Off Feature Conserves and Extends Battery Life, 50 to 1000V AC Power Operating Range Allows Broad Application, Receptacle Tester is Designed to Detect the Most Common Wiring Problems in Standard Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Kit Comes With NCVT1P Non-Contact Voltage Tester, RT205 GFCI Receptacle Tester, Instructions, and All Required Batteries

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester Pen, 50 to 1000V AC, Volt Pen With High Intensity, Bright Green LED Indicates The Tester Is Powered On, Auto Power-Off Feature Conserves and Extends Battery Life CAT IV 1000V Safety Rating, Includes: Instructions and (2) AAA 1.5 Volt Batteries

Category: Voltage & Continuity Testers

Dual Range Non-Contact Voltage Tester with Flashlight, Dual-Range Capabilities Allow Tester To Detect From 12 to 1000 V AC or 70 to 1000V AC For A Broad Variety of Low-Voltage Or Standard Voltage Applications, Visual and Audible Voltage Indicators, Auto Power-Off, IP67: Dustproof and Waterproof, Batteries: 2 x AAA (Included)

Category: Voltage & Continuity Testers

Dual Range Non-Contact Voltage Tester 12, Indicates Low Voltage (12 to 48V AC) And Standard Voltage (70 to 1000V AC) Allowing Broad Application, Non-Contact Detection, Lightweight, Compact, Auto Power-Off, IP67: Dustproof and Waterproof

Category: Voltage & Continuity Testers

Single Range 24-600V AC NCVT w/Flashlight, UL Certified CAT IV 600V AC, 24 to 600 V AC, LED Flashlight In The Tip Operates Independently Of The Tester Functions And Can Be Used To Illuminate The Work Area, Audible Notification Disable, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), Low Battery Indication

Category: Voltage & Continuity Testers

Lvd1 Is A Non-contact Ac Voltage Detector And Led Flashlight Combined In One Convenient, Compact Design. With Exclusive Dual-sensitivity - The Voltage Detectorglows Blue When It's Near Ac Voltage, And Glows Red When It's At The Source. Detects Voltages From 40 V Ac To 300 V Ac. Voltage Detector Glows Blue 50 Hz - 60 Hz Or 2.5 - 38 Cm (1 - 5 In) Away From Source. Operating Temperature 0 C To 50 C.ultra-bright White Led With 100,000 Hour Bulb Life. Aaa Battery Included.

Category: Voltage & Continuity Testers

Multimeter, Maximum Rating: 1000V AC/DC, Features: 3 Forms of Indication (Light, Sound, Vibration), Resistance (0-9.99kOhms), Voltage (12-600V AC/DC), GFCI Trip Function & Heavy Duty/Replaceable Test Leads, Includes: User Manual, TP2 Test Probes and Leads, Two AAA Batteries, Test Lead Strap

Category: Voltage & Continuity Testers

Voltage Tester With LED Flashlight, Non-Contact, Range 50-1000 Volt AC, Dust Tight And Water Proof, Audible Notification Disable, Auto Power Off, Low Battery Indication, UL Listed

Category: Voltage & Continuity Testers

Voltage Tester, K-60, Maximum Rating: 600V AC/DC, Features: Indicates Presences of Voltage (120-600V AC/DC), Visually Indicates Voltage Level and Type & Low Impedance

Category: Voltage & Continuity Testers

1000 Volt Electrical Tester With Fieldsense, Simultaneous Voltage and Current Display, 1 to 1000 Volt AC or DC, 0 to 200 Amp AC, Works With Wire Up To 4/0 AWG

Category: Voltage & Continuity Testers

P-S10S21-M3RX-V Voltage Test Station with Flashing Voltage Indicator and Safe-Test Point, Vertical/Flange Mount, UL Type 4 Housing. Operational Range AC Single/3-Phase 40-600VAC 50/60/400Hz. Operational Range DC or Stored Energy 30-600 VDC

Category: Voltage & Continuity Testers

Voltage Tester, Non-Contact, Maximum Rating, 1000V AC, Features: Low Voltage (12-48V AC) and Standard Voltage (48-1000V AC), Green LED Indicators, Safety Rating: CAT IV 1000V AC. Includes: (2) AAA Batteries.

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester with Flashlight, Detects 12 – 1000V AC with Visual and Audible Voltage indicators. Safety Rating CAT IV 1000V.

Category: Voltage & Continuity Testers

3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C) Continuously Monitor Up to 1000 Hours of Voltage, Current, Capacity/Charge Delivered, Energy, and Resistance (Calculated), Tests Most Common Standard USB-A or USB-C Ports, Including Qualcomm Quick Charge® Ports

Category: Voltage & Continuity Testers

Electronic Ac/Dc Voltage Tester 12 To 240V Ac, 1.5 To 24V Dc Et40 Tests Ac Voltages From 12V To 240V Ac At Four Useful Levels Aligned With Commonly Used Residential Voltages Tests Dc Voltages From 1.5V To Greater Than 17 To 24V At Four Useful Levels Aligned With Commonly Used Dc Voltages Bright Leds Illuminate To Indicate The Type And Level Of Voltage Detected Built To Withstand A 9.9-Foot (3 M) Drop Indicates Polarity When Measuring Dc Voltages Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Catiii 250V, Class 2, Double Insulation Ingress Protection Ip41 Dust And Water Resistant Built-In Test Lead Holders On Sides Of Tester Low Battery Indicator With Easily Accessible Battery Compartment Pocket Clip Secures Tester To Pocket For Reliable Everyday Carrying Uses 2 X Aaa Batteries (Included) Identifies And Distinguishes Between Ac Or Dc Voltage

Category: Voltage & Continuity Testers

T5-rls, Replacement Test Leads For Fluke T5-1000 Or T5-600 Voltage, Continuity And Current Testers

Category: Voltage & Continuity Testers

Voltage Tester, Multimeter, Maximum Rating: 1000V AC/DC, Features: Voltage, Continuity, Frequency & Polarity, Includes: Leads

Category: Voltage & Continuity Testers

Measures and Displays the USB Port Voltage, Current, Capacity, Energy and Resistance Simultaneously, Requires NO BATTERIES as it Draws Power from the Power Source

Category: Voltage & Continuity Testers