Safety, Tools, & Testing

Wire Pulling Lubricant, Yellow 77, Wax-Based, Includes: (1) 5-Gallon Bucket

Category: Wax-Based Pulling Lubricant

20V Max LED Hand Held Area Light, Run Time: Up To 22 Hours, Weight: 2 lbs, Light Output: High (1000 Lumens) & Low (500 Lumens), ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Battery Operated Work Lights

7-Piece Screwdriver Set, Includes: Keystone (1/4", Shank Length: 4", Square), Keystone (1/4", Shank Length: 6"), Cabinet (3/16", Shank Length: 3"), Cabinet (3/16", Shank Length: 6"), Cabinet (1/4", Shank Length: 4"), Phillips (#1, Shank Length: 3"), Phill

Category: Screwdriver Sets

Wire Marker Booklet, Legend: 0-9 (45 each); L1, L2, L3, T1, T2, T3 (15 each)

Category: Wire Marker Booklets

8" Level, Magnetic, V-Grooved Edge, Vials: (4), Material: Aluminum

Category: Torpedo Levels

11-in-1 Magnetic Screwdriver / Nut Driver With Combo Tips, Precision Machined Tip Designed For Combination Head Screws, Included Tips: 3/8-Inch, 5/16-Inch And 1/4-Inch Nut Drivers, #1 And #2 Phillips, 1/4-Inch And 3/16-Inch Slotted, T10 And T15 TORX®, And #1 And #2 Square Recess

Category: Combination Screwdriver/Nutdrivers

Comfort Grip Gloves, Nitrile Pam Coated, Size Large, Gray, For General Applications

Category: Dipped Gloves

Battery, 1.5V, Type: LR03, AAA, Alkaline, 250 m-ohm at 1 kHz

Category: Non-Rechargeable AAA Batteries

Long Hex Bit Socket Set, SAE and Metric, 16-Piece, Chrome-Vanadium/Steel, Case Included

Category: Sockets & Socket Sets

Refill Cartridge, Nylon Cloth, Dimensions" 0.5" x 16', Color: Black on White, Finish: Matte

Category: Permanent Tapes

Hex Bit, Hex Shank Size: 5/16", Length: 6", Color: Yellow.

Category: Hex & Socket Insert / Power Bits

M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring, 600 ft-lbs of Torque, Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575, AUTO SHUT-OFF™ To Prevent Overtightening, Tri-LEDs For Dark Spaces, ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Impact Wrenches

Carbide Tipped Hole Saw, Diameter: 1-1/8", Chuck Size: 3/8", Conduit Size: 3/4"

Category: Carbide Tipped Hole Saws

The MILWAUKEE® M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The 1/2" Friction Ring design allows for quick & tool-free socket changes.

Category: Cordless Heavy Duty Impact Wrenches

TKO Hole Saw, Carbide Tipped, Diameter: 7/8" (22 mm)

Category: Carbide Tipped Hole Saws

M18 Fuel™ ½” Hammer Drill/Driver with One-Key™, Cordless, Powerstate™ Brushless Motor, Includes Side Handle and Belt Clip

Category: Cordless Heavy Duty Drill Drivers

6V, Super Heavy Duty, Carbon Zinc, Spring Terminal, Lantern Battery

Category: Non-Rechargeable Lantern Batteries

123A Size, 3V, Lithium Batteries, 12-Pack, Holds Power for Up To 10 Years in Storage

Category: Non-Rechargeable Flashlight Batteries

Custom Snap­On / Strap­On Pipe Marker, 1.5 Inch x .875 Inch, White, with Sharpie, Quotet#24111411

Category: Clip-On Wire Markers

Heavy Duty Lineman's Pliers, 9-Inch, High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs

Category: Side Cutting Pliers

Dual Range Non-Contact Voltage Tester with Flashlight, Dual-Range Capabilities Allow Tester To Detect From 12 to 1000 V AC or 70 to 1000V AC For A Broad Variety of Low-Voltage Or Standard Voltage Applications, Visual and Audible Voltage Indicators, Auto Power-Off, IP67: Dustproof and Waterproof, Batteries: 2 x AAA (Included)

Category: Voltage & Continuity Testers

Non-Detectable Underground Tape, 3 IN Roll Width, 1000 FT Roll Length, Caution Buried Electric Line Below Legend, LDPE, Red, 4 MIL Thickness, Elongation: 500 PCT ASTM D882-75B, Tensile Strength: 2750 PSI ASTM D882, Recommended Burial Depth: 4 - 6 IN, For Protection, Location And Identification Of Underground Utility Installations

Category: Underground Tape

Impact Bit Set Includes (2) #2 Phillips, #2 Square, (2) Combination Bits, (4) Torx Bits, (12) Hex Bits, Impact Bit Holder Plus A Ratcheting T-Handle Housed In A Modbox™ Case, Ratcheting On/Off Switch Can Lock In The Static Position For High Torque On Interchangeable Extended Length Bits, Powerful Magnet Inside Barrel To Better Retain Bits, As Well As Pick-Up And Hold Fasteners, Proflex Impact-Rated Bits With Impact-Absorbing Torsion Zone To Extend Life Of The Bits, Smooth Ratcheting Function Creates Low Backdrag For Optimal Ratcheting Performance, Compact, Modular Storage System Is Designed To Nest Neatly Within The Modbox™ And Is Stackable With Cases Of Similar Design, Clear Lid For Quick Tool Identification, T-Handle Carefully Designed To Bury The Ratcheting Mechanism In The Palm For Maximum Grip Comfort Between The Fingers And In The Palm

Category: T-Handle Hex Key Sets

#5 Step Drill Bit, Hole Diameter: 1/4 - 1-3/8 inch, Increments: 1/8 inch, Shank Size: 3/8 inch, Number of Steps: 10, Coating: Black Oxide, Application: Metal/Plastic, Package Qty: 1

Category: Step Bits