Search results

Crimp Die for CT-720, 400 kcmil copper connector.

Category: Wire Crimping Dies, Adapters, & Blades

Kit upgrades Opti-Crimp Termination KitConverts Opti-Crimp Termination Kits with the additional tools, installation instructions, and stripping templates required for termination of all Panduit OptiCam Pre-Polished Cam Connectors, includes OptiCam Termination Tool and cradles, and FVFLPC-2.

Category: Fiber Optic Termination Kits

Clsed Mesh Pull 33-01-012 Grip

Category: Cable Pulling Heads - Compression Style

Punch-rd 1.500 Conduit (737)

Category: Metal Stud Punches

Max Cable Diameeter: 0.790, Jacket Mil Thickness: 95, Max Bushing Inner Diameter: 0.800 Material: Aluminum.

Category: Cable Stripper Bushings

PROBEPlus - Tone Tracing Probe. Trace wire Path and Identify Cables in Common Wiring Systems. Length: 9.9". Uses 9v Batteries. Weight: 4.4oz.

Category: Tone Generators & Probes

6X3 4X.035 PROG. MET.CT.REC.BL

Category: Bi-Metal Reciprocating Saw Blades

Infrared Imager, Thermal Camera, Ti10, Features: -4°F - 482°F Temperature Range, 160 x 120 Pixel Resolution, 3.6" LCD, SD Card Slot, Manual Focus & Thermal Sensitivity Is 0.13°C, Includes: Power Supply, Battery Charger, SD Card, SD Card Reader, SmartView

Category: Thermal Imagers

Grn 00967 Gauge Package-force

Category: Cable Pulling Sheaves & Rollers

GREENLEE 555CXES

Category: Electric Conduit Benders

Die for Key Punch Unit, 1.171 Inch x .123 Inch

Category: Knockout Dies

DRILL MAG STAND BASE 9Fixed Position, Variable Speed Base, For Use On Any Flat Ferrous Material, 1/2inand Thicker, Voltage: 120vac, Drill Travel: 9in, Cord Type: 9ft Fixed, Construction Type: Grounded, Height: 15in, Width: 4 1/4in, Length: 11in

Category: Cordless Heavy Duty Drill Drivers

Hydraulic Trash Pump, Submersible, 3"Hydraulic Trash Pump, Submersible, Discharge Port: 3" NPT Female, Capacity: 500 gpm [at 8 gpm and a 15' Head Height], Flow Range: 7 - 10 gpm, Operating Pressure: 0 - 2,000 PSI, Pressure and Return Port Thread: 1/2" Male NPTF, Weight: 28 lbs.

Category: Corded Hydraulic Pumps

MIL 49-56-9632 2-9/16FT HOLE

Category: Bi-Metal Hole Saws

18 PC HOLE DOZER™ Master Plumbers Hole Saw Kit, Includes: (1) 3/4" Hole Dozer™ Bi-Metal Hole Saw, (1) 7/8" Hole Dozer™ Bi-Metal Hole Saw, (1) 1 1/8" Hole Dozer™ Bi-Metal Hole Saw, (1) 1 3/8" Hole Dozer™ Bi-Metal Hole Saw, (1) 1 1-2 in Hole Dozer Bi-Metal Hole Saw, (1) 1 3-4 in Hole Dozer Bi-Metal Hole Saw, (1) 2 1/4" Hole Dozer™ Bi-Metal Hole Saw, (1) 2 5-8 in Hole Dozer Bi-Metal Hole Saw, (1) 3" Hole Dozer™ Bi-Metal Hole Saw, (1) 4 1/2" in Hole Dozer™ Bi-Metal Hole Saw, (1) 4 1/4" Hole Dozer™ Bi-Metal Hole Saw, (1) 1/8" Hex Key, (1) Small Thread Arbor, 3/8" Shank (49-56-7010), (1) Large Thread Quick Change Arbor, 7/16" Shank (49-56-9100) & (3) High Speed Steel Pilot Bit 1/4" x 3-1/2" (49-56-8010)

Category: Hole Saw Kits

Hydraulic Pole TamperHydraulic Pole Tamper with Valve, Hose End Valve, Length: 5', Weight: 23 lbs, System: Open-and Closed-Center, Width: 4", Hydraulic Flow: 4 - 6 GPM, Operating Pressure: 1,000 - 2,000 PSI, Pressure Port Thread: 9/16 - 18 SAE O-Ring, Return Port Thread: 3/4

Category: Hydraulic Pole Tampers

Punch Unit Assy, 1.21"(30.5mm)Slug Buster Punch Unit Assy, 1.21" (30.5mm), Self Centering

Category: Knockout Punches

Punch Unit,bb 28,3mm (3/4"d/s)

Category: Knockout Punches

Transmitter-circuit Tracer (36926)

Category: Circuit Tracers

Set ScrewSet Screw for 904H-12/34980, 904H-18/35356 and 904H-24/35358.

Category: Replacement Drill Bit Extension Set Screws

18 Gauge Center Shear Blade Each Blade Is Replaceable Separately But It Is Recommended To Change All Three At The Same Time For Maximum Sharpness, Width: 0.25in

Category: Cable Cutters

Punchdown/multi-screwdriver 8-in-1 6pc Counter Display

Category: Non-Impact Punchdown Tools

KLE 1232HS HACKSAW BLADES,

Category: Hacksaw Blades

Electromagnetic Drill Press, Adjustable, Solid State Electronic Switching, Feedback Speed Control, Line Lock-out Preventstool From Operating Should Voltage Be Restored To An Interrupted Line, Voltage:120vac, Ampere: 12.5amp, Drill Capacity: 1.25in, No Load Speed: 500/250rpm, Cordtype: 9ft Fix

Category: Cordless Heavy Duty Drill Drivers