Search results

THB 2680 3/8IN 90D LT CORDCON

Category: 90° Non-Metallic Cord Grips

Pulling Grip 16-Inch L 0.62'' to 0.74-Inch Dia, KPS Heavy Duty Medium Length

Category: Offset Eye Pulling Grips

Rotating Eye Pulling Grip for 1.5 to 1.99-Inch Med, KPS Heavy Duty Medium Length

Category: Rotating Eye Pulling Grips

THB 2639 3/4IN STR LT CHASE C

Category: Straight Steel Cord Grips

THB 2633 1/2IN STR LT CHASE C

Category: Straight Steel Cord Grips

Haven Grip With Swing Latch, 1/8 Inch to 1/2 Inch Outside Diameter Wire Rope, Maximum Safe Load: 5000 Pound (2268 kg)

Category: Wire Rope Support Grips

K-Basket Type Pulling Grip for Cable Diameter Range 2.50" - 2.99" (63.5 mm - 76.1 mm). Use to pull in conduit or tray. Heavy-duty, long, hard runs. Double-weave galvanized steel mesh with forged steel swivel eye. Select the grip with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.

Category: Rotating Eye Pulling Grips

Pulling Grip, 1.0 to 1.5-Inch Diameter, 36-Inch, KP Heavy Duty - Medium Length

Category: Flexible Rope Eye Pulling Grips

Light Duty Pulling Grips 1.5 to 1.75-Inch, KPL Light Duty Grip Short Length

Category: Flexible Rope Eye Pulling Grips

Pulling Grip 36-Inch Length 1.5 to 2-Inch, KP Heavy Duty - Medium Length

Category: Flexible Rope Eye Pulling Grips

Junior Pulling 33-05-001 Grip

Category: Flexible Eye Pulling Grips

Eye Pulling Grips Med 2 to 2.5-Inch Cable, KPS Heavy Duty - Medium-Long Length

Category: Offset Eye Pulling Grips

THB 2646 1 INCH CORD GRIP CON

Category: Straight Steel Cord Grips

Liquidtight Cord Connector, Type Chase, Size: 1/2 Inch, Cable Range: 0.450 - 0.560 Inch, Material: Steel

Category: Straight Steel Cord Grips

THB 2637 3/4 IN. CHASE CONN.

Category: Straight Steel Cord Grips

THB 2638 3/4IN STR LT CHASE C

Category: Straight Steel Cord Grips

Grip for Weatherproof Wire 0.74-Inch Capacity, Works on 0.53 to 0.74-Inch (13.46 to 18.80 mm) cable diameter range

Category: Wire Rope Support Grips

Split Mesh Rod Closing Basket-Type Slack Pulling Grip for Cable Diameter 2.0" - 2.49" (50.8 mm - 63.4 mm). Use to pull when the end of the conductor is not available. For light and straight pulls, the rod will not flex around bends. Single weave galvanized steel mesh with rod closing and an offset flexible pulling eye. Select the grip with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.

Category: Flexible Eye Pulling Grips

Haven Grip With Swing Latch, 1/2 Inch to 1 Inch Outside Diameter Wire Rope, Maximum Safe Load: 8000 Pound (3629 kg)

Category: Wire Rope Support Grips

Grip Mesh Double-weave Flex-eye 24" .75"-.99" Cable

Category: Flexible Rope Eye Pulling Grips

THB 2688 CONN CORD GRIP

Category: 90° Steel Cord Grips

Curved Jaw Grip for EHS Cable with Latch, When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip

Category: Wire Rope Support Grips

OZ-Gedney Type CGA Straight Strain Relief Cord Grip Connector, Size: 3/4 IN, Conductor Range: 0.5 - 0.625 IN, Copper-Free Aluminum, 90 DEG C, Connection: Tapered MNPT Hub, 0.81 IN Throat Inside Diameter, 9/16 IN Thread Length, Dimensions: 1-1/2 IN Maximum Diameter X 2-1/16 IN Length, Third Party Certification: UL File Number E-11857, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification, Commercial Item Description A-505-52, For Securing And Terminating Electrical Cable To A Threaded Entry In A Box Or Enclosure

Category: Straight Aluminum Cord Grips

OZ-Gedney Type CGA Straight Strain Relief Cord Grip Connector, Size: 3/4 IN, Conductor Range: 0.625 - 0.75 IN, Copper-Free Aluminum, 90 DEG C, Connection: Tapered MNPT Hub, 0.81 IN Throat Inside Diameter, 9/16 IN Thread Length, Dimensions: 1-1/

Category: Straight Aluminum Cord Grips