"terminal blocks"

IDE 83S-EAFB1-C STREET LIGHTI

Category: Streetlight Breakaway Y-Tap Kits

HOM FYC-6 MECH FUSE AND DISCONNECT KIT Y TYPE

Category: Streetlight Breakaway Y-Tap Kits

HOM DYC-4 MECH FUSE AND DISCONNECT KIT Y TYPE

Category: Streetlight Breakaway Y-Tap Kits

Insulating Resin, Material: Two-Part Polybutadiene, 12.3 Ounces, For Use in Sealing/Insulating/Mechanical Protection

Category: Insulating & Sealing Compound

KUP-L-Tap Insulation Piercing Copper Connector, Dual Rated, Main Conductor Range 4/0-4, Tap Range 6-14, Tin Plated, UL, CSA

Category: Splices - Insulation Piercing

3MÖ ScotchcastÖ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.

Category: Insulating & Sealing Compound

KUP-L-Tap Insulation Piercing Copper Connector, Dual Rated, Main Conductor Range 4/0-2, Tap Range 2/0-6, Tin Plated, UL, CSA

Category: Splices - Insulation Piercing

Insulation Piercing Connector, Run 3 - 4/0 AWG, Tap 10 - 2 AWG, Rated for Copper and Aluminum Conductors

Category: Splices - Insulation Piercing

Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits - Y Type Disconnect Kit, fused, conductor range main 14-2 tap 12-4

Category: Streetlight Breakaway Y-Tap Kits

1/0-10AWG INSL PRCCON

Category: Splices - Insulation Piercing

Motor Stub Splice Insulator 12 - 2 AWG, Bolt Max Length 3/4 inch

Category: Low Voltage Motor Lead Splice Kits

UF Direct Burial Splice Kit, 14-8 AWG, Heavy Wall Heat Shrink Sleeve, Aluminum

Category: Direct Burial Datacom Splice Kits

3MÖ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The spliceÆs main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.

Category: Medium Voltage Motor Lead Splice Kits

scotch(r) Tape Termination Kit 5703, 25/28kv, 800-1000 Kcmil

Category: Medium Voltage Cold Shrink Splice Kits

500KCMIL-4/0AWG INSL PRCCON

Category: Splices - Insulation Piercing

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 250 MCM - 500 MCM, Motor Lead Range: 4/0 - 500 MCM. Voltage Range: 1000V, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

HOM DYU-M NON-FUSED Y-TYPE

Category: Streetlight Breakaway Y-Tap Kits

CP1967-000 GELCAP SL SPLICE COVERS FOR STREET LIGHTS WATER RESISTANT COVER KIT WITH CONNECTOR (1000V) 100/PACK

Category: Direct Burial Datacom Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 8 AWG - 4 AWG, Tubing Size: 0.75" x 6.0". For use Aluminum or Copper Cable in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Direct Bury, 600V, Wire Range: 18 AWG - 10 AWG. Includes: (2) Splice Tubes, (2) R Connectors and (2) Y Connectors.

Category: Low Voltage Direct Burial Splice Kits

Lighting Disconnect Kit, Y-Kit, 4 AWG, Fused With Aluminum Run/Copper Tap, 30 Amp, 600 Volt, Ideal For Heavy-Duty Applications.

Category: Streetlight Breakaway Y-Tap Kits

Motor Stub Splice Insulator 350 AWG - 500 kcmil, Bolt Max Length 1-3/4 inch

Category: Low Voltage Motor Lead Splice Kits

IDEAL, Underground Splice Kit, Thermo-ShrinkÖ, Al/Cu Splice Kits, Cable Size: 1/0 AWG - 250 KCMIL, Voltage Rating: 600 V, Operating Temperature: 105 DEG C

Category: Low Voltage Heat Shrink Splice Kits

Stub Splice & Motor Connecor Kit, 8 - 2 AWG, Heat Shrink

Category: Low Voltage Motor Lead Splice Kits