"the thomas"

PMAFIX Straight Black Connector with Metric Threads, Connector Material - Polyamide 6, Thread Material - Nickel Plated Brass, Thread Size - M32x1.5, Thread Length - 13, Conduit Size NW - 29

Category: Straight Non-Metallic Liquidtight Flex Connectors

THB OD581 COMP TOOL 5/8 DIE S

Category: Wire Crimping Tools

Crimp Tool for Shield-kon Outer Sleeve GSC Connectors Up To .348 I.D. And Insulated Outer Sleeve GSR Connectors Up To .297 I.D., Length 8 inches, weight without dies 1 pound.

Category: Wire Crimping Tools

3-1/2IN STAMPED STEEL CVR

Category: PVC Coated Conduit Body Covers

3-1/2" Diameter, Ceiling/Fixture Box with Bar Hanger, Phenolic, Depth: 2-1/8". Cubic Inches: 13.5", Fixture Weight: 50 lbs. Adjustable Bracket Length: 16-1/2" - 27", Includes: High Clamps and Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

1POLE INLINE FUSEHOLDER WITH CRIMP TERMI. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass ûreinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Category: In-Line Fuse Holders

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

GE's circuit breaker enclosures are UL Listed, CSA Certified and are suitable for use as service equipment (except as noted). The short circuit rating of the enclosure/circuit breaker combination is equal to the short circuit rating of the installed circuit breaker. Frame notes and/or restrictions Enclosure can also be used with TJD. Enclosure notes and/or limitation Suitable for parallel 250 kcmil cable maximum (use 600 amp enclosure if larger cable is required). ACCESSORIES Neutral Kit (non-GF applications) TNIA400 GE's circuit breaker enclosures are UL Listed, CSA Certified and are suitable for use as service equipment (except as noted). The short circuit rating of the enclosure/circuit breaker combination is equal to the short circuit rating of the installed circuit breaker. Frame notes and/or restrictions, Enclosure can also be used with TJD. Enclosure notes and/or limitation: Suitable for parallel 250 kcmil cable maximum (use 600 amp enclosure if larger cable is required). Enclosure does not include nockouts (NEMA Type12). ACCESSORIES:Neutral Kit (non-GF applications):TNIA400

Category: Molded Case Circuit Breaker Enclosures

3-1/2" Diameter, Old Work Ceiling/Fixture Box, Phenolic, Depth: 2-1/8. Cubic Inches: 14". Includes: High Clamps. New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

3-1/2" Diameter, Ceiling/Fixture Pan, Phenolic, Depth: 5/8". Cubic Inches: 3.5". New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Ceiling Pans

The SolarEdge Cellular Kit Enables Internet Connectivity from the Inverter to the SolarEdge Cloud-Based Monitoring Platform with No Need to Rely on the HomeownerGÇÖs Internet Connection. The Cellular Modem Can Be Installed Directly Inside the SolarEdge Inverter and Connected to an External Antenna, Simplifying the Communication Set Up and Saving Installation Time. 12 Year Prepaid Plan.

Category: Solar Monitoring Accessories

4" Diameter, Nail-On, Ceiling/Fixture Box with "N" Bracket, Phenolic, Depth: 1-5/8", Cubic Inches: 13.5", Includes: Nails, Clamps, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

3-1/2" Diameter, Old Work Ceiling/Fixture Box with Brackets, Phenolic, Depth: 2-1/8". Cubic Inches: 14", Fixture Weight: 15 lbs. Includes: #9 Snap-In Bracket, High Clamps, #40 Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 3.500 Inches, Nominal Conduit Size 3 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

AL.36INWX6IND HT 12INRAD

Category: Cable Tray Horizontal Tees

THB AHF518LVI9012 ALUM 90 DEG

Category: 90° Vertical Inside Cable Tray Bend

THB AHF612LHB9024 H BEAM 12 INCH VERTICAL OUTSIDE 90 24 INCH RADIUS ALUMINUM

Category: 90° Horizontal Cable Tray Bend

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 1 - 1.5. Type LPJ-SP or AJT Maximum Fuse: 2. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

Long Impact Auger Wood Bit 11/16" x 30". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

Category: Knockout Punches

The ta25du-4.0 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10a. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop- and test function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type

The 4-Post rack combines the stability of a cabinet with the accessibility of an open rack to deliver maximum flexibility. The 45 RU rack is 23 inches wide overall (with 19 inch standard EIA mount) and 36 inches deep, with adjustable mounting rails that have cage nut EIA universal mounting hole spacing, and printed numbering. A range of cable managers and accessories work with the rack. The rack is UL listed for 2,500 pounds and is made of welded steel. The rack is black.

Category: Floor Mount Racks

The Deluxe Combination Ceramic Heater, Light, and Exhaust Fan will make your home a more comfortable place providing the perfect solution for rooms that are in need of extra warmth. This combination unit features 1350 watts of ceramic heating power and provides 70 CFM of ventilation at 5.0 Sones. It also provides up to 100 watts of incandescent lighting. A moonstone glass light lens diffuses light throughout the room and will not yellow and become brittle over time like most plastic lens. The self-regulating ceramic heating element maintains a lower surface temperature than traditional coil heaters. The 4" metal duct connection collar and damper protects against back drafts. The unit easily installs using the included adjustable hanging brackets.

Category: Fan / Light / Heater Units

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits