"the thomas"

SELF ADJ WIRE STRIPPER

Category: Wire Strippers

THB M32-100 ADAPTER M32 TO 1

Category: Metric Cable Gland Adapters

BLK 600-SW WRENCH SPANNER

Category: Adjustable Wrenches

Fine Profile Medium Wall Very Flexible Black Conduit, (PCL) Material - Polyamide 6, Conduit Size NW - 23, 50 Meters

Category: HDPE Innerduct

THB HR-EXPB-2A HANNAY PUSH BU

Category: Explosion-Proof Assembled Switches

Divisible Flexible Black Conduit, (PACOF) Material - Polyamide 6, Conduit Size NW - 10, 50 Meters

Category: HDPE Innerduct

1.1/2 NPT NICKEL FLAMEP ROOF GLAND

Category: Brass Cable Glands

2 Inch Aluminum, Grounding and Bonding Locknut for Use with Rigid/IMC Conduit

Category: Non-Releasable Cable Ties

Putty type sealing compound cut-to-length stick. Suitable for use on cables with a maximum of four conductors including ground. Not suitable for use with shielded cables.

Category: Epoxy Putty

Non-metallic cord grip, PG09.

Category: Straight Non-Metallic Cord Grips

TB 3KH29 TY551M PK100 3.6" 18LB ID

Category: Non-Releasable Cable Ties

#14 TO 10 CU STD BAR BTM STKING

Category: 1-Hole Copper Compression Lugs

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 3.500 Inches, Nominal Conduit Size 3 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

The SolarEdge Cellular kit enables Internet connectivity from the StorEdge inverter to the SolarEdge Cloud-Based Monitoring Platform with no need to rely on the homeowner’s internet connection. The cellular modem can be installed directly inside the SolarEdge StorEdge inverter and connected to an external antenna, simplifying the communication set up and saving installation time. 5 year prepaid plan.

Category: Solar Inverter Cellular Modems

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 5.5 - 8.5. Type LPJ-SP or AJT Maximum Fuse: 12. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

RED EXFU-5 1-1/2" F/F

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

The MT-13 Telescoping 13 ft MultiLadder is versatile and easy to transport. The telescoping design allows the ladder to be used in 4 different positions -- twin stepladder, stairway stepladder, extension ladder and as 2 scaffold bases. In the stepladder mode, the multiladder can be used for one or two person jobs with a duty rating of 300 pounds per side. The feet are slip resistant and the ends of the ladder are flared for firm support. Smooth curved rails allow for comfortable climbing. With its many uses, this ladder may fit all your climbing needs.

Category: 300 Pound Rated Stepladders

AL.36INWX6IND HT 12INRAD

Category: Cable Tray Horizontal Tees

THB AHF518LVI9012 ALUM 90 DEG

Category: 90° Vertical Inside Cable Tray Bend

ALUMINUM 6 INCH SIDE RAIL HEIGHT 36 INCH WIDTH CLOSURE END PLATE

Category: Cable Tray Mounting Hardware

Long Impact Auger Wood Bit 11/16" x 30". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

Category: Knockout Punches