Search results

Reducing Washer, Steel, 4" x 3"

Category: Reducing Washers

OZ-Gedney BS-A Series Domed Top Design Cover, 2-1/2 - 3 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Aluminum Conduit Body Opening

Category: Aluminum Conduit Body Covers

OZ-Gedney Clamp Back, Size: 1-1/4 IN, 5/16 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 3-11/16 IN Length X 1-7/16 IN Width, 1/2 IN Hole, Dimension E: 9/16 IN X 17/32 IN, Third Party Certification: CSA 009795, Applicable

Category: Clamp Backs - Iron

Conduit Bushing, Insulating, 1/2 Inch, Threaded, Copper Free Aluminum, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Reducing Washer, Steel, 1-1/2" x 1"

Category: Reducing Washers

OZ-Gedney Spec 5 Type T Conduit Body, 1-1/4 IN Hub, Length: 9-1/8 IN, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL Fi

Category: Type T Iron Conduit Bodies

Grounding Bushing, 1 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Bronze Lug 14 - 4 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 1 IN, Closed-Cell Neoprene, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

OZ-Gedney Type 4Q-FM Combination Coupling, Trade Size: 3/4 IN, 1-1/2 IN Outside Diameter, Length: 1-5/8 IN, Flexibility: RMC And IMC, Malleable Iron, Steel Ferrule, Connection: Compression X FNPT Hub, Enclosure: NEMA 4, Third Party Certification:

Category: Steel Rigid To Liquidtight Combination Couplings

OZ-Gedney BS-S Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL

Category: Steel Conduit Body Covers

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-7/16 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/4 IN Length X 2-1/2 IN Width, 5/8 I

Category: Straight Squeeze Flex Connectors

AC/Flex Connectorector, 90°, Squeeze, 1-1/2 Inch, Malleable

Category: 90 Degree Two Screw Squeeze Flex Connectors

Conduit Bushing, Threaded, 2 Inch, Malleable Iron/Zinc Plated, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Grounding Bushing, 2-1/2 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Thermoplastic Insulator Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type ACV 90 DEG Center Stopped 2-Screw Clamp Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 25/32 - 61/64 IN, Malleable Iron, Finish: Zinc Electroplated, 7/16 IN Thread Length, Dimension A: 1-3/4 IN, Dim

Category: 90 Degree Two Screw Squeeze Flex Connectors

Type GH Swivel Ground Hub, 4/0 AWG - 500 MCM, Length: 1-7/8 IN, Size: 1-1/4 IN, Cast Bronze, Screws: Brass, 2-11/16 IN Height, Dimension B: 2-1/2 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

Pulling Elbow, Threaded, Female / Female, 1 Inch, Malleable Iron, Rigid Conduit / IMC, With Gasket, 90°, UL, CSA, Gasketed, Watertight

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-1/4 IN, Trade Size: 3/4 IN, Connection: FNPT X MNPSM, 1-1/2 IN Height, 1/2 IN Thread Length, Third Party Certification: UL File Number E-

Category: Iron Rigid Conduit Elbows

Reducing Washer, Steel, 2" x 3/4"

Category: Reducing Washers

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/4 X 3/4 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A,

Category: Steel Reducing Bushings

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 2.19 IN Outside Diameter, 1.11 IN Inside Diameter, 1-1/4 X 3/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

OZ-Gedney Type C Center Stopped Straight Squeeze Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 25/32 - 15/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Length X 15/16 IN Width, 1/2 IN Thread Length, Third Party Certification: UL File Number E-11852, UL Listed (Flexible Metal Conduit), CSA 009795 (Armored Cable), Hazardous Location: NEC 501-4(b), Class I, Division II, NEC 350-5 (Grounding Means), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable And Flexible Metal Conduit

Category: Single Barrel MC / AC Connectors

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-3/16 IN Length X 2-3/16 IN Width, 9/16 I

Category: Straight Squeeze Flex Connectors