Search results

1/2 GUAL BODY WITH AL COVER

Category: PVC Coated Explosion-Proof GUAL Conduit Outlet Boxes

PMAB2012 1-1/2 PIPE STRAP

Category: PVC Coated Conduit Support Straps

RJ Series Enclosure, Raised Flush Bonded Window Cover, Hinged, Padlock Latches, Size/Dims: 8" x 6" x 6", Material/Finish: Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

ROB PRC789 2-1/2 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

ROB PRLL29 3/4 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

ROB PRREC31SA 1 - 1/2 AL REDUCING COUPLING

Category: PVC Coated Couplings

RRY PRFSC222SA 3/4 AL FS BODY

Category: PVC Coated Explosion-Proof GUAC Conduit Outlet Boxes

Plasti-Bond mogul style conduit bodies are offered in numerous configurations to provide a complete coated conduit system. Mogul BG Covers are sold separately. Mogul style fitting bodies have long openings and may be used to make bends in conduit runs, for pull outlets for stiff conductors, to provide additional room for taps or splices, etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRLB39 1 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage."

Category: Straight PVC Coated Type LT Connectors

ROB PRT889 3 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

PVC Coated Malleable Elbow, 90°, Female to Female, Aluminum, 1-1/4 Inch

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRGUAL14 1/2 GUAL BODY WITH AL COVER

Category: PVC Coated Explosion-Proof GUAL Conduit Outlet Boxes

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

ROB PRREC43SA 1-1/4 - 1 AL REDUCING COUPLING

Category: PVC Coated Couplings

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAB Conduit Outlet Boxes

ROB PRGUAT59SA 1-1/2 AL GUAT BODY W/COVER

Category: PVC Coated Explosion-Proof GUAT Conduit Outlet Boxes

Replacement Encapsulated Screws Kits

Category: Button Head Cap Screws

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRHNIP-2-1/2X10 2-1/2X10 NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-1-1/4X2 1-1/4X2 AL NIPPLE

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples