Search results

Hammer-Drill Bit, Rock Carbide, Length: 12", Diameter: 1/2", Shank: SDS.+.

Category: SDS Masonry Bits

Heavy-Wall Heat-Shrinkable Tubing for Cable Range 2/0 - 350 kcmil, Expanded Diameter 1.5 Inch, Length 12 Inch, 600 Volt, 90 Degrees Continuous Use, Cross-Linked Polyolefin with Thermoplastic Adhesive Liner, Black

Category: Heavy Wall Heat Shrink

Hacksaw Frame; Highest Tension; Blade Size: 12 Inch Length; Teeth Per Inch: 24 TPI; Handle Material: Rubberized

Category: Hack Saws

Mini-Change Cordset, 3 Pin, Straight Male Receptacle. 16-1 Conductor, 12" PVC Leads. 13 Amp, 600V AC/DC. NEMA Rating: 6P. Includes: 1" Black Coupler. 7/8" Receptacle

Category: Cordset Mating Receptacles

Harger, 1/4 x 4 x 12", Ground Bar With Wall Mounting Brackets and Insulators, "J" Hole Pattern, Copper Ground Bar, Each

Category: Load Center Neutral & Ground Bars

Bi-Metal Reciprocating Saw Blade, 12" Long x 3/4" Wide x .050" Thick, 6 TPI, 5/Pack

Category: Bi-Metal Reciprocating Saw Blades

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range 250 MCM - 400 MCM, Insulation Diameter Range 0.67 Inch - 1.38 Inch, Relaxed Tube Length 12.0 Inch. For use with all Solid Dielectric (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

12-Inch Bi-Metal Blades, 24 TPI, 10-Pack, Fits all 12-Inch (305 mm) hacksaw blades

Category: Hacksaw Blades

Threaded Conduit Nipple, 3-1/2 Inch x 12 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Bit Extension, Length: 12", Hex Shank Size: 7/16".

Category: Drill Bit Extensions

UV Resistant Cable Tie, 12" Long, UL Rated, 50lb Tensile Strength, PA66UV, Black, 100/PK

Category: Non-Releasable Cable Ties

Hammer-Drill Bit, Rock Carbide, Length: 12", Diameter: 3/8", Shank: SDS.+.

Category: SDS Masonry Bits

Hacksaw Blade; T2 Technology; Width: 1/2 In; Length: 12 In; Teeth Per Inch: 32 Tpi; Material: Bi-metal

Category: Hacksaw Blades

Wireway, Type 1, Hinged Cover, Lay-In, Straight Section, Size/Dims: 6" x 6" x 12", Material/Finish: Steel/Gray. No Knockouts.

Category: Hinged Cover Wireway

IDEAL, Blade, Reciprocating, Wood w/Nail, Width: 3/4 IN, Length: 12 IN, Thickness: 050 IN, Teeth Per Inch: 6 TPI, Material: Bi-Metal, Teeth Type: High-Speed Steel, Blade Back: Taper

Category: Bi-Metal Reciprocating Saw Blades

A new blade design that delivers up to 100% longer blade life versus the prior generation of LENOX hacksaw blades. Bi-metal construction allows blades to bend and flex without breaking.

Category: Hacksaw Blades