Poke-Through Systems

STL FPT4-CPA-4KEY 4X4 COM A P

Category: Poke-Through Cover Assemblies

STL FPT3-2P-2C-BRS 2X2 POKE-T

Category: Assembled Poke-Through Units

STL FPT4-4P-4C-TALM 4X4 POKE-

Category: Assembled Poke-Through Units

Hubbell Wiring Device Kellems, In-Floor Delivery Systems, SystemOne,Fire-Rated Poke-Through, One-Piece, 2) StyleLine, With Junction Box,Brass

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: All Brass. Diameter: 7". Depth: 16-1/2". Includes: Quad Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade), (2) Openings for Pass Through Capability for 4-Pair Cat 5e or Cat 6 Cable. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Drop-in rubber grommet for pass-through cabling. Set of two grommets (one grommet shown) in black.

Category: Assembled Poke-Through Units

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish with a brushed aluminum and a aluminum colored device plate. Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Category: Poke-Through Cover Assemblies

WMD RC4KTCBS SCRUB WATER RETR

Category: Assembled Poke-Through Units

WMD AMD8CTCBK BK FL & BK CV/C

Category: Poke-Through Cover Assemblies

WMD AMD8APTCBK ALL COMM PT AB

Category: Poke-Through Cover Assemblies

WMD 2150CHA 1-1/2IN TRADE SIZ

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

6" Round, Furniture Feed Cover Assembly, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4", (1) 2 to 1-1/4". Material/Finish: Aluminum/Aluminum Powder-Coat, For Tile, Carpet and Wood Flooring. Includes: (1) 3/4" Conduit Connector, (1) 1-1/4" Conduit Connector and (1) Service Divider. Caution: Not for Use on Concrete Pours Less Than 4 1/2"; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

WMD RC7AM2TCAL 2IN. FURNITURE

Category: Assembled Poke-Through Units

Flange available in painted gray (GY), black (BK), ivory (VY), or brushed metal finished in aluminum (AL), and brass (BS) . Slide covers match the painted flange colors, gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Aluminum Flange with Aluminum Nonmentallic Cover.

Category: Poke-Through Cover Assemblies

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

6" Round, Furniture Feed Cover Assembly, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4", (1) 2 to 1-1/4". Material/Finish: Aluminum/Gray Powder-Coat, For Tile, Carpet and Wood Flooring. Includes: (1) 3/4" Conduit Connector, (1) 1-1/4" Conduit Connector and (1) Service Divider. Caution: Not for Use on Concrete Pours Less Than 4 1/2"; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies