Poke-Through Systems

6 Inch Poke-thru Device, Pre-Wired A/V Surface Style Assembly , Depth 16 1/4 Inch, Includes (1) 20 Amp Duplex Receptacle, Multiple Low voltage and AV Device Plates, Black Aluminum Cover

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Complete with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Must be used with a conduit connector (not included) at the adapter assembly plate to maintain fire classification. Finish flange/cover assembly available in gray (GY), black (BK), and brushed aluminum (AL). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AM2TC Series Poke-Thru Devices require a 3" [76mm] diameter hole. Not designed to work with bare concrete or terrazzo.

Category: Poke-Through Cover Assemblies

WMD AMD8SHTCBK AMD8 SLIDE HOL

Category: Poke-Through Cover Assemblies

Single-gang with one surge suppression receptacle opening.

Category: Poke-Through Mounting Plates

FRPT 1 PC. 3U INFINE + 20A SYS 1 AL

Category: Assembled Poke-Through Units

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

Single-gang, blank.

Category: Poke-Through Mounting Plates

STL FFPT4-CVR-ALM FFPT4 COVER

Category: Assembled Poke-Through Units

STL FPT4-CPA-4ORT 4X4 COM A P

Category: Poke-Through Cover Assemblies

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Cover assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Poke-Through Cover Assemblies

6IN FURNITURE FEED-GRAY

Category: Assembled Poke-Through Units

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish with a brushed brass and a black device plate. Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.

Category: Poke-Through Mounting Plates

WMD 6ATCFFBZ 6IN FURNITURE FE

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Diameter: 4 Inch, Includes: (4) Pre-Wired 20 Amp, 125 Volt Receptacles, (4) Keystone Openings, With Universal Cover and Carpet Flange, Black, Aluminum

Category: Assembled Poke-Through Units

In-floor Delivery Systems, Systemone Through-floor Fitting, 4x4, Dual Channel

Category: Assembled Poke-Through Units

Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Category: Poke-Through Cover Assemblies

WMD RC4KTCBS SCRUB WATER RETR

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

Hubbell Wiring Device Kellems, In-Floor Delivery Systems, SystemOne,Fire-Rated Poke-Through, One-Piece, 2) StyleLine, With Junction Box,Brass

Category: Assembled Poke-Through Units

WMD AMD8APTCBK ALL COMM PT AB

Category: Poke-Through Cover Assemblies