Poke-Through Systems

Poke-Thru Assembly, Flush Furniture Feed, 4" Round, BlackPoke-Thru Assembly, Flush Furniture Feed, 4 Inch Round, Complete With One-Piece Finish Flange And Conduit Assembly with (1) 3/4 Inch and (1) 1-1/4 Inch Screw Plug Opening,Color: Black, For Use On tile/Carpet Floors

Category: Assembled Poke-Through Units

Furniture Feed Cover Assembly, 6 Inch Round, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4 Inch, (1) 2 to 1-1/4 Inch. Material/Finish: Aluminum Die-Cast/Brass Powder-Coat, Includes: (1) 3/4 Inch Conduit Connector, (1) 1-1/4 Inch Conduit Connector and (1) Service Divider. For Tile, Carpet and Wood Flooring. Caution: Not for Use on Concrete Pours Less Than 4 1/2 Inch; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Nickel

Category: Poke-Through Cover Assemblies

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Aluminum

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIRED-FLUSH AV BLACK6IN CORE-PREWIRED-FLUSH AV BLACK

Category: Assembled Poke-Through Units

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAA

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

6" Round Cover, Recessed Evolution 6AT Series,Flush,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat.

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

8IN CORE-PREWIREDRecessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (BS) brass."

Category: Assembled Poke-Through Units

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Stl-cty P90-1/2 Floor Plate W /plug

Category: Poke-Through Cover Assemblies

6" Round Cover, Flush, Recessed Evolution 6AT Series,Gray6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

8in Cover Assembly Flush-brass8in Cover Assembly Flush-brass

Category: Poke-Through Cover Assemblies

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BZ) bronze.

Category: Assembled Poke-Through Units

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BS) brass.

Category: Poke-Through Cover Assemblies