Poke-Through Systems

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Brass Flange. Diameter: 8-1/4". Depth: 9-1/16". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

<p>Single-gang device plate used to blank off any one (1) of the three (3) gangs in the center compartment, when no devices are used.</p>

Category: Poke-Through Mounting Plates

In-Floor Delivery Systems, SystemOne, Recessed 4" Series, Sub Plate, (1) StyleLine® Decorator Opening

Category: Poke-Through Mounting Plates

Two-gang 2" trade size conduit housing assembly. Used on 8AT Series devices. Covers two (2) of the three (3) gangs in the center compartment. Only for use with 8AT Series units.

Category: Poke-Through Mounting Plates

WMD 42A 4IN EVO 1/2 GANG COMM

Category: Poke-Through Cover Assemblies

WMD 4REC 4IN EVO 1/2 GANG 20A

Category: Assembled Poke-Through Units

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units

Poke-Thru Device, Recessed, Assembled Unit, Metallic, For Use In 6 Inch Diameter Opening, Recessed 3 1/4 Inch Below Floor Surface, Die-Cast Aluminum Cover Assembly, Available in the Following Powder Coated Finishes: Black, Gray, Nickel, Brass, Bronze, and Aluminum, For Carpet, Tile, Wood And Laminate Concrete Floor Coverings.

Category: Assembled Poke-Through Units

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Brushed Aluminum

Category: Assembled Poke-Through Units

Recessed Furniture Feed Assembly with Surface Style Cover, 6" Diameter, Bronze

Category: Assembled Poke-Through Units

Poke-Through Device, Prewired, 4 Inch Diameter, (2) 20 Amp Duplex Receptacles, (10) 1-1/2 and 3/4 Inch Knockouts, NEMA 5-20R, 125 Volt, Gray

Category: Assembled Poke-Through Units

WMD 8CTC2SN

Category: Poke-Through Cover Assemblies

RC7 PT W/ AL FLANGE AND AL CENTER

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finished with an brushed aluminum flange and a black colored device plate. Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9 Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Hubbell Wiring Device Kellems, Fire Rated Poke Throughs, Recessed 4"Series, Quad Through Floor Fitting with Aluminum Cover

Category: Assembled Poke-Through Units

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color gray.

Category: Assembled Poke-Through Units

WLK 175CHA-LJB 1-GANG 3/4IN C

Category: Poke-Through Mounting Plates

Device Mounting Plate, Type: Blank, Metallic, Used to Blank Off Either of the Side Compartments When No Devices or Cabling Are To Be Used.

Category: Poke-Through Mounting Plates

Flush Furniture Feed Poke-Through Unit, Hole Size: 4", Brass

Category: Assembled Poke-Through Units

Hubbell Wiring Device Kellems, Fire Rated Poke Throughs, Recessed 4"Series, Through Floor Fitting with Junction Box

Category: Assembled Poke-Through Units

WMD 4B 4IN EVO 1/2 GANG BLANK

Category: Poke-Through Cover Assemblies