"wiremold"

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 16-1/4 Inch, Black

Category: Assembled Poke-Through Units

Abandonment available in black (BK) or gray (GY). NOTE: To abandon the RC7 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Poke-Through Cover Assemblies

Allows outer compartments to be adapted to accept any of the 68 device plates. One 68DB is required to mount two 68 device plates in each outer compartment.

Category: Poke-Through Mounting Plates

6IN FLUSH STYLE CVR ASSEMBLY SB

Category: Poke-Through Cover Assemblies

WMD 8ATC2SN 8IN UNWIRED SURF

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Gray Powder Coat Finish

Category: Poke-Through Cover Assemblies

WMD 4REC-CTRL 4IN EVO 1/2 GAN

Category: Poke-Through Mounting Plates

Slide Holder Assembly, Hole Size: 3 Inch, Available Colors: Black, Gray, Ivory, Non-Metallic Brass, and Non-Metallic Aluminum, Assembled with Scrub Water Gasket, For Use on Tile or Carpet Floors.

Category: Assembled Poke-Through Units

RC7 CONTROLLED REC SLIDE HOLDER AL

Category: Poke-Through Cover Assemblies

WMD 4ATP2RSN

Category: Assembled Poke-Through Units

WMD 8CT-CTR 8IN POKE-THRU TER

Category: Assembled Poke-Through Units

WMD 4ATP2RBK

Category: Assembled Poke-Through Units

8IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Assembled Poke-Through Units

WLK 6ATC2PCRBK 6IN PRWRD SURF

Category: Assembled Poke-Through Units

WMD 4ATCP2RSB 4IN PREWIRED SU

Category: Assembled Poke-Through Units

WLK 44DP 4IN EVO DUP REC DEVI

Category: Poke-Through Cover Assemblies

WMD 10ATCPAA

Category: Assembled Poke-Through Units

8IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Bronze

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Brass

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Aluminum Powder-Coat.

Category: Poke-Through Cover Assemblies

Poke-Thru Assembly, Diameter: 6", Type: (2) Duplex, MetallicPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units