"wiremold"

6IN FLUSH STYLE CVR ASSEMBLY SB

Category: Poke-Through Cover Assemblies

WMD 8ATC2SN 8IN UNWIRED SURF

Category: Assembled Poke-Through Units

WMD 8CT-CTR 8IN POKE-THRU TER

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Gray Powder Coat Finish

Category: Poke-Through Cover Assemblies

WMD 4ATCP2RSB 4IN PREWIRED SU

Category: Assembled Poke-Through Units

8IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Assembled Poke-Through Units

WLK 44DP 4IN EVO DUP REC DEVI

Category: Poke-Through Cover Assemblies

WLK 6ATC2PCRBK 6IN PRWRD SURF

Category: Assembled Poke-Through Units

Cover assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Poke-Through Cover Assemblies

Single-gang with one surge suppression receptacle opening.

Category: Poke-Through Mounting Plates

WMD AMD8SHTCBK AMD8 SLIDE HOL

Category: Poke-Through Cover Assemblies

Complete with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Must be used with a conduit connector (not included) at the adapter assembly plate to maintain fire classification. Finish flange/cover assembly available in gray (GY), black (BK), and brushed aluminum (AL). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AM2TC Series Poke-Thru Devices require a 3" [76mm] diameter hole. Not designed to work with bare concrete or terrazzo.

Category: Poke-Through Cover Assemblies

WMD PSRC9TCBS

Category: Assembled Poke-Through Units

Prewired 15A quad receptacle can be wired as standard quad receptacle or isolated ground. Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). RC9 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC9 Assembled Unit-Brass Flange and Black Slide Holder, 15A Quad Receptacle Standard or IG Finish - Brass

Category: Assembled Poke-Through Units

Single-gang, blank.

Category: Poke-Through Mounting Plates

Single-Gang with one 1/2" trade size knockout.

Category: Poke-Through Mounting Plates

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Flush, Assembled Unit, Nonmetallic Cover, Color: Brushed Brass Flange with Aluminum-Colored Cover. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet, Wood or Tile Applications.

Category: Assembled Poke-Through Units

6IN FURNITURE FEED-GRAY

Category: Assembled Poke-Through Units

6 Inch Poke-thru Device, Pre-Wired A/V Surface Style Assembly , Depth 16 1/4 Inch, Includes (1) 20 Amp Duplex Receptacle, Multiple Low voltage and AV Device Plates, Black Aluminum Cover

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 4 Inch Diameter, Aluminum Cover With Satin Nickel Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Poke-Thru Device Assembly, 6" Diameter, Silver Finish

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Black Powder Coat Finish

Category: Poke-Through Cover Assemblies