"wiremold"

8IN TILE SHIMS

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini a

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

One and a half-gang pass through housing assembly. Used for furniture feed applications on the center compartment only. Only for use with the 6AT Series units.

Category: Poke-Through Cover Assemblies

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

DBL GANG PLATE W/ACT KO

Category: Poke-Through Mounting Plates

WMD RC9SHTCGY P-THRU QUAD SLI

Category: Poke-Through Cover Assemblies

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

MOUNTING BRACKET

Category: Poke-Through Mounting Plates

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Two-gang device plate that will accept up to four (4) Extron Electronics AAP style plates. This device plate takes up two of the three gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Black

Category: Poke-Through Cover Assemblies

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 4 Inch Diameter, Aluminum Cover With Satin Nickel Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

W-mold 241-h/btc Housing/base

Category: Assembled Poke-Through Units

W-mold Fifp75 Sgl Gang Plate with 3/4" Opening

Category: Poke-Through Mounting Plates

WMD AMD8ATCAB FLUSH POKE-THRU

Category: Poke-Through Cover Assemblies

WMD 4ATCSN 4IN UNWIRED PT ASS

Category: Poke-Through Cover Assemblies

Half-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. For use on side compartments only.

Category: Poke-Through Mounting Plates

WMD 4ATCP2CRBK 4IN PREWIRED-S

Category: Assembled Poke-Through Units