Search results

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

STL FFPT4-CVR-BRS FFPT4 COVER

Category: Assembled Poke-Through Units

Poke-Through Cover, (2) Receptacle and (2) Data Openings, 7-1/2 Inch Diameter, Brass

Category: Assembled Poke-Through Units

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finished with a brass flange also available with black colored device plate. Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

Round One-Piece Receptacle Cover, Diameter: 3-3/8 Inch, Metallic, Color: Brass, Carpet Cover For Flush Service Floor Box

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Flush Brass Poke-Through

Category: Assembled Poke-Through Units

All communication device accepts up to four UTP connectors. Finished with a brushed brass flange and a black device plate. Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

KIN FFPT3-BRS POKE-THRU

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini a

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

WMD RC7ATCBS-LJB FLUSH POKE-T

Category: Assembled Poke-Through Units