"wiremold"

2" IPS to 1/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

To connect S4000 Series Raceway with surface type panel boxes. Accommodates maximum wire capacity of S4000 Series Raceway. Separate C-shaped flange fits around raceway, covering any irregularities from cutting into box. Cut 4 3/4" x 1 3/4" [121mm x 44mm] hole in panel box.

Category: Recessed Floor Box Service Fittings

4IN EVO SINGLE 1-9/16IN REC DEVICE

Category: Recessed Floor Box Service Fittings

CRFB 2 PORT COMM PLATE LOC 3

Category: Recessed Floor Box Service Fittings

This blank plate accepts three (3) Ortronics TracJack inserts. Finish - Galvanized Steel

Category: Recessed Floor Box Service Fittings

SINGLE GANG COMM PLT ACTIVATE

Category: Recessed Floor Box Service Fittings

1/2 GANG PASS THROUGH PLATE

Category: Recessed Floor Box Service Fittings

WMD EFB6-TUN EVOLUTION FLR BO

Category: Recessed Floor Box Service Fittings

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Exterior-gang pass through assembly. Designed to allow cables to pass through one (1) of the four (4) exterior-gang compartment locations.

Category: Recessed Floor Box Service Fittings

RFB6 1.59 DIA. SINGLE REC PLATE

Category: Recessed Floor Box Service Fittings

WMD EFB810-3/4-3/4 3/4IN / 3/

Category: Recessed Floor Box Service Fittings

Nonmetallic ring for use with bare concrete and terrazzo floor applications.

Category: Recessed Floor Box Service Fittings

<p>Attaching ring for Source I (preset or afterset) zinc die-cast. 4'' (102mm) O.D. 7/8'' ring depth.</p>

Category: Recessed Floor Box Service Fittings

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

<p>Double GFI opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted hole one side. Blank plate other side. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

<p>Installed either before or after concrete pour to create activation from duct. NOTE: Drill a 2 1/2'' (64mm) hole in concrete and a 2 1/4'' (57mm) hole in duct.</p>

Category: Recessed Floor Box Service Fittings

CRFB 2 PORT COMM PLATE LOC 2

Category: Recessed Floor Box Service Fittings

Single-gang with one 1.562" (39.7mm) receptacle opening.

Category: Recessed Floor Box Service Fittings

<p>Four (4) duplex KOs. One plate supplied with AC8850 Box. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.</p>

Category: Recessed Floor Box Service Fittings

Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Recessed Floor Box Service Fittings