"wiremold"

Floor Box Cover, 1-Gang, Non-Metallic, Accepts three (3) 2A Activate inserts.

Category: Recessed Floor Box Service Fittings

Wm S6008a S.s. C-hanger

Category: Recessed Floor Box Service Fittings

Single Flushmount Unloaded Keystone Module, Accepts keystone jacks with a latching area of 0.58" x 0.76"

Category: Recessed Floor Box Service Fittings

Single Gang Plate, 1 Inch Knockout, Steel

Category: Recessed Floor Box Service Fittings

Accepts three (3) Wiremold Open System inserts or three (3) CM2 Series Open System modules.

Category: Recessed Floor Box Service Fittings

Wiremold 500sp-1 7/16 Device plate

Category: Recessed Floor Box Service Fittings

Communication Bracket. For Activate (DTB-2-2AB) or Ortronics (DTB-2-2RT) devices. Ortronics and Activate adapters included. For use with: RFB4 Series Compartment Type Boxes.

Category: Recessed Floor Box Service Fittings

SGT PLATE W/ EXTRON MAAP OPENING

Category: Recessed Floor Box Service Fittings

Single Gang Cover 3 Seriesii Insert

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Communication Jack (One Side)

Category: Recessed Floor Box Service Fittings

SS BRKT W/TWO 2A MINI BEZELS

Category: Recessed Floor Box Service Fittings

Service Box Fitting, Type: 20 Amp, 125 Volt Duplex Receptacle (One Side), Metallic

Category: Recessed Floor Box Service Fittings

6A opening with communication adapter on one side. Accommodates Wiremold Open System communication modules. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Duplex Receptacle. For use with 525 Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Accepts standard 15 Amp and 20 Amp duplex receptacles. NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

1IN CENTER COMP CON FEED FOR EVO PT

Category: Recessed Floor Box Service Fittings

RACKET PRO DIVIDER

Category: Recessed Floor Box Service Dividers

Single-gang device plate that accepts standard 20A duplex receptacle or duplex Turnlok receptacle. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Nonmetallic sleeve attaches to structural decking and maintains 6" - 6 1/8" diameter cast in hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.

Category: Recessed Floor Box Tools

Used to close off unused gangs. NOTE: For use with RFB4E, RFB6 and RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Brushed aluminum communication cover plate. Allows for up to four communication devices to be mounted in a recessed position within the 880S and 880CS Floor Boxes. Has removable slides for cable egress. NOTE: Not for use with 817C, 827C, and 837C Flanges.

Category: Recessed Floor Box Service Fittings

Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Nonmetallic sleeve attaches to structural decking and maintains 8" - 8 1/8" diameter cast in hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.

Category: Recessed Floor Box Tools