Search results

6A opening with communication adapter on one side. Accommodates Wiremold Open System communication modules. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Nonmetallic ring for use with bare concrete and terrazzo floor applications.

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

RFB6 1.59 DIA. SINGLE REC PLATE

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted hole one side. Blank plate other side. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

WMD EFB810-3/4-3/4 3/4IN / 3/

Category: Recessed Floor Box Service Fittings

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

<p>Installed either before or after concrete pour to create activation from duct. NOTE: Drill a 2 1/2'' (64mm) hole in concrete and a 2 1/4'' (57mm) hole in duct.</p>

Category: Recessed Floor Box Service Fittings

Exterior-gang pass through assembly. Designed to allow cables to pass through one (1) of the four (4) exterior-gang compartment locations.

Category: Recessed Floor Box Service Fittings

<p>Attaching ring for Source I (preset or afterset) zinc die-cast. 4'' (102mm) O.D. 7/8'' ring depth.</p>

Category: Recessed Floor Box Service Fittings

<p>Double GFI opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

INT DPLX RCPT BRKT

Category: Recessed Floor Box Service Fittings

Module Assembly, 10 Gang

Category: Recessed Floor Box Service Fittings

RFB2 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

RFB4-4DB DEVICE PLATE W/EXTRON MAAP

Category: Recessed Floor Box Service Fittings

Has one 2" trade size knockout.

Category: Recessed Floor Box Service Fittings

2" IPS Afterset insert - 2 7/8" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

<p>Faceplate with 6a mini adapter for Wiremold Open System CM2 communication modules.</p>

Category: Recessed Floor Box Service Fittings

PDSTL FITTING 11/4IN OPNG BOTH SIDE

Category: Recessed Floor Box Service Fittings

Single opening with Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters.

Category: Recessed Floor Box Service Fittings

W-mold 500sp78 Face Plt 7/8"

Category: Recessed Floor Box Service Fittings

BARRIER KIT FOR THE RFB6 FLOOR BOX

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings