Compartment Boxes & Covers

REC AFB 2 GANG 2.5 IN

Category: Recessed Compartment Boxes

Access Floor Module Cover, Metallic, Color: Brown. For use with 668 Series Concealed Service Floor Boxes in Carpet & Tile Applications.

Category: Recessed Compartment Box Covers

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Compartment Boxes

Accepts up to three (3) Ortronics Series II devices. Ortronics devices sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

THB 668CSTBLK 668S METALCOVER

Category: Recessed Compartment Box Covers

REC CFB 4 GANG 3.25 IN CAST

Category: Recessed Compartment Boxes

European device plate accepts up to (45mm x 67.5mm) Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" (69mm x 114mm).

Category: Recessed Compartment Box Device Plates

WMD TB672AUBK INTEGREAT BOX A

Category: Recessed Compartment Boxes

Single receptacle 1.59" (40mm). diameter. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

WMD EFB10-AAP EFB10 EXTRON AA

Category: Recessed Compartment Box Device Plates

Accepts single device 1.39" (35mm). NOTE: Standard size for device plates for Plate Location 1 is 6 11/32" (161mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

This box has a 5" (127mm) depth design and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Recessed Compartment Boxes

Blank plate. Used to blank off the entire center compartment when no devices or cabling are to be used.

Category: Recessed Compartment Box Covers

STC 667-CST-SW-BRN

Category: Recessed Compartment Box Covers

Replaced by Hubbell CFB2G30E - Concrete Floorboxes, Galvanized Stamped Steel Box, Recessed, 2-Gang CFB Series Box for Rectangular Covers, 3.00" Minimum Depth of Pour

Category: Recessed Compartment Boxes

STL 665-CST-M-BLK BLACK COVER

Category: Recessed Compartment Box Covers

STEEL CITY 667-CST-SW-GRY

Category: Recessed Compartment Box Covers

Accepts up to three (3) dual Wiremold Open System communication adapters. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

SS BRKT W/TWO ORT BEZELS

Category: Recessed Compartment Boxes

WMD EHWBC4-BK 4-GANG HINGED C

Category: Recessed Compartment Box Covers

Recessed Floor Box, 4-Gang, Depth: 3-1/2 Inch, 3/4 - 2 Inch Conduit Openings, Steel

Category: Recessed Compartment Boxes

Stl P62-cp-brn Plst Carpetplt

Category: Recessed Compartment Box Covers

Replaced by Hubbell CFB4G30E - REC CFB 4 GANG

Category: Recessed Compartment Boxes