Boxes - Recessed

Surface Style Floor Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAA

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Rectangular Floor Box, Fully Adjustable, 1-Gang, Threaded Conduit Hub Size: (4) 3/4 Inch, H x W x D = 4.38 Inch x 3.19 Inch x 3.19 Inch, Cubic Inches: 33, Material: Cast Iron

Category: Recessed Adjustable Floor Boxes

6" Round Cover, Recessed Evolution 6AT Series,Flush,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate. Other device plates sold separately. 2-Compartment On-Grade Recessed Box W/Tunnel, 1 Duplex Bracket and 1 Comm Bracket

Category: Recessed Compartment Boxes

Pedestal, Alu, 4-g, W/ 3/4" HubIn-floor Delivery Systems, Large Capacity Series Pedestals, 4-gang, With 3/4" Npt Hub

Category: Recessed Floor Box Service Fittings

8IN CORE-PREWIREDRecessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (BS) brass."

Category: Assembled Poke-Through Units

FLOOR BOX W/1 GANG BRASS FLANGE

Category: Square Recessed Floor Boxes

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Stl-cty P90-1/2 Floor Plate W /plug

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Gray

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover Face Plate, 1-Gang, Type: Duplex, MetallicFloor Box Cover Face Plate, 1-Gang, Type: Duplex, Metallic

Category: Square Recessed Floor Boxes

8in Cover Assembly Flush-brass8in Cover Assembly Flush-brass

Category: Poke-Through Cover Assemblies

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BZ) bronze.

Category: Assembled Poke-Through Units

ALUM COVER FOR 665 - CARPET RECESSCover with Recess for Floor Covering for 665 Series Boxes, Aluminum, Load Rating 1500 Pounds

Category: Square / Rectangle Recessed Box Covers

Cvr Assy-brushed Aluminum-flushFlanged Cover Assembly, Material: Aluminum, Size: 6 9/16 in Length, 7 3/4 in Width

Category: Square / Rectangle Recessed Box Covers

Flush Style Cover with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

STL SFH-50 BLANK COVER

Category: Recessed Floor Box Service Dividers

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

HUB SA5017A COVER FLANGE, RECT ALU

Category: Recessed Box Adapters