Search results

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

Exterior-gang pass through assembly. Designed to allow cables to pass through one (1) of the four (4) exterior-gang compartment locations.

Category: Recessed Floor Box Service Fittings

WMDDQFP15UBK-2A

Category: Assembled Recessed Countertop Boxes

W-mold Amd8atcgy Poke Thru

Category: Poke-Through Cover Assemblies

The 880CM3 Omnibox Floor Box Series provides an excellent activation solution for applications where single service is required in open space areas. The 880CM3 floor box is offered in a stamped steel construction, designed to be installed in above grade concrete floor applications and to meet a wide range of market requirements.

Category: Square Recessed Floor Boxes

WMD WMFB1SRKS1B 1-GANG SINGLE

Category: Assembled Recessed Gang Boxes

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

WMD 880CS3-NA 3-GANG CAST IRO

Category: Recessed Compartment Boxes

Surface Style Floor Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

FLUSH CARPET PLATE-525 SERIES

Category: Square / Rectangle Recessed Box Covers

RFB2 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

INT DPLX RCPT BRKT

Category: Recessed Floor Box Service Fittings

This box has a 4" (102mm) depth design and can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Stainless steel blanking plate only. Includes 1/4-20 screw.

Category: Round Recessed Box Covers

Furniture feed insert with one 1 1/4" and one 1/2" trade size conduit to feed power and communication services. Use with RC9CFFTC Series Covers to form a complete poke-thru assembly. NOTE: RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Aluminum floor box construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Unit comes with a 15A quad receptacle and a brushed brass flange and black color device plate.

Category: Assembled Recessed Round Boxes

All communication floor boxes accept up to four UTP connectors. Flush poke-thru-style flanges available. Slide covers match painted flange colors. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu. cm.) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Includes two (2) Ortronics TracJack inserts, two (2) Ortronics Series II adapters and two Wiremold Open System adapters. Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Modular jacks sold separately. Black

Category: Assembled Recessed Round Boxes

Use with RC3C Series Covers to complete installation. NOTE: RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Stainless steel blanking plate with threaded base for 3/4" (19.1mm) IPS.

Category: Round Recessed Box Covers

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas. One Keystone Cat6 Jack.

Category: Poke-Through Mounting Plates

Flangless cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Black

Category: Square / Rectangle Recessed Box Covers

Module Assembly, 10 Gang

Category: Recessed Floor Box Service Fittings

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Brass

Category: Square / Rectangle Recessed Box Flanges