Search results

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

WMD TB672AUBK INTEGREAT BOX A

Category: Recessed Compartment Boxes

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

Flangeless Cut-Out Cover Assembly, For Use In Tile Applications, Material: Die Cast Aluminum, Color: Bronze

Category: Square / Rectangle Recessed Box Covers

Furniture Feed Cover Assembly, Rectangular, (1) 1 Inch Screw Plugs and (1) Combo Screw Plug 1-1/4 and 2 Inch, Bronze

Category: Square / Rectangle Recessed Box Covers

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Gray

Category: Poke-Through Cover Assemblies

WMD EFS-SM FLAT SCREEN STORAG

Category: Recessed Home Entertainment Boxes

WMD FPCTBKTR FLANGELESS INSER

Category: Square / Rectangle Recessed Box Covers

Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout.

Category: Recessed Floor Box Service Fittings

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

W-mold 428dr2 Flush Carpet Pl ate Double Duplex

Category: Square / Rectangle Recessed Box Covers

Floor Box Assembly, Furniture Feed, Diameter: 4 Inch, (2) 1/2 Inch and (1) 3/4 Inch Conduit Openings, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Brass, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Legs allow floor box to be adjusted up or down to match the dsired pour height of the concrete. Includes two (2) leveling legs. Threaded rod not supplied.

Category: Recessed Floor Box Service Dividers

Floor Box Assembly, 1-Gang, Nickel. Includes 106 Adapter with Four Openings and (2) Screw Plugs

Category: Assembled Recessed Gang Boxes

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Gray

Category: Square / Rectangle Recessed Box Covers

Provides separation of services. Includes one (1) divider plate. Evolution 6-Gang Floor Box Divider

Category: Recessed Floor Box Service Dividers

DBL GANG PLATE W/ACT KO

Category: Poke-Through Mounting Plates

2-Gang, Cover Plate Flange, Metallic, Color: Black. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

WMD 431BR075 DOUBLE BLANKING

Category: Square / Rectangle Recessed Box Covers

Duplex Power Plate with Flip Lids, Color: Bronze

Category: Round Recessed Box Covers

WMD RC9SHTCGY P-THRU QUAD SLI

Category: Poke-Through Cover Assemblies

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier

Category: Assembled Poke-Through Units

W-mold 437-11/2 Attaching Rin g

Category: Recessed Floor Box Service Fittings