Search results

ROB PREYD1SA 1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PR5237GRAL 2 STRAIGHT LT CONN W/GRN AL

Category: Straight PVC Coated Type LT Connectors

ROB PRSSP350 3-1/2 SPLIT COUPLING

Category: PVC Coated Split Couplings

ROB PR5348GR 2-1/2 45 CONNECTOR W/GRND

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond PVC coated pipe straps are used to securely mount conduit to a wall or other structure for support. They are available in two styles: a one-hole malleable iron strap or a two-hole stamped steel strap. Mounting hardware not provided.

Category: PVC Coated Conduit Support Straps

ROB PRLL19 1/2 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

ROB PRLR39 1 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PRLBD1100 1/2 PULLING ELBOW LBD

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

ROB PRT1089 4 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

Rob-r Pr5253al 3/4 90 Lt Conn

Category: 90 Degree PVC Coated Type LT Connectors

Conduit Body, Type: LR, FM8, Size: 3 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LR Conduit Bodies

Rry Prbg48 1-1 1/4 Bg Cover mogul

Category: PVC Coated Conduit Body Covers

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LR Conduit Bodies

Liquidtight Connector, 45° Angle, Size: 1-1/4 inch, Material: PVC Coated Steel.

Category: 45 Degree PVC Coated Type LT Connectors

1 Inch PVC Coated Hanger Rod Beam Clamp, Pipe Size: 1-1/2"

Category: PVC Coated Beam Clamps

4 Form 7 Lb Fitting

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prh580f 1-1/2 Form 8 Co

Category: PVC Coated Conduit Body Covers

Rry Prt47sa 1 1/4" Pvc Ctd alum. Form 7 T Conduit

Category: PVC Coated Type T Conduit Bodies

1 SERVICE ENTRANCE ELBOW

Category: PVC Coated Type LB Conduit Bodies

Conduit Clamp Edge Style, Size: 1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Edge Beam Clamps