Search results

ROB PRNIP-AL-1-1/2XCL 1-1/2XCLOSE AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Parallel : to attach the conduit run parallel to a beam or structural member.

Category: PVC Coated Parallel Beam Clamps

ROB PR5252GRAL 1/2 90 LT CONN W/GRN AL

Category: Straight PVC Coated Type LT Connectors

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

ROB PRHNIP-3XCL 3XCLOSE NIPPLE

Category: PVC Coated Nipples

ROB PRLR789 2-1/2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PBPAR-3-1/2 3-1/2 PARALLEL BEAM CLAMP

Category: PVC Coated Parallel Beam Clamps

ROB PREYD66 2 M/F SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

ROB PBU-BOLT-2-1/2 2-1/2 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

ROB PR5355GR 1-1/4 90 LT CONN W/GRND

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-1-1/2X2-1/2 1-1/2X2-1/2 NIPPLE

Category: PVC Coated Nipples

ROB PR590 1-1/2 MARK 9 COVER

Category: PVC Coated Conduit Body Covers

ROB PRXJG94 3-1/2 EXPANSION JOINT 4

Category: PVC Coated Expansion Couplings

Female/Male Union, Size: 3-1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Female-Male Unions

Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage."

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

ROB PREYD8SA 3 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

ROB PRC29 3/4 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies