Search results

Plasti-Bond mogul style conduit bodies are offered in numerous configurations to provide a complete coated conduit system. Mogul BG Covers are sold separately. Mogul style fitting bodies have long openings and may be used to make bends in conduit runs, for pull outlets for stiff conductors, to provide additional room for taps or splices, etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRLL789 2-1/2 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

ROB PRLBD5500SA 1-1/2 AL PULLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

ROB PR690 2 MARK 9 COVER

Category: PVC Coated Conduit Body Covers

Perma-Cote, Conduit Body And Cover, Form: T Form 8, Length: 9.310 IN, Width: 2.670 IN, Height: 2.290 IN, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Material: Ferrous Body, Plastic Encapsulated Stainless Steel Screw, Dimension D: 1.380 IN, Pipe Size: 1 IN, Dimension E: 4.560 IN, Includes: Screw

Category: PVC Coated Type T Conduit Bodies

RRYPRLBD2200SA 3/4 Inch LBD Aluminum Pulling Elbows

Category: PVC Coated Type LB Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type C Conduit Bodies

ROB PRT889 3 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

ROB PRLB39 1 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

RRY PRLBD4400 1-1/4 PULLING E

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prbub8 3 Bub Fitting Mo

Category: PVC Coated Type C Conduit Bodies

Rob-r Prx57 1-1/2 Form 7 X Fi

Category: PVC Coated Type X Conduit Bodies

Rob-r Prt97 3-1/2 Form 7 T Fitting

Category: PVC Coated Type T Conduit Bodies

Robroy Prtb47sa 1 1/4" Pvc coated Alum Form 7 Tb Condulet

Category: PVC Coated Type TB Conduit Bodies

Rob-r Prx57sa 1-1/2 Al Form 7

Category: PVC Coated Type X Conduit Bodies

PCP PMC67 2 FORM 7 C FITTING

Category: PVC Coated Type C Conduit Bodies

Conduit Body, Type T, Size: 3/4 Inch, Form 7, Steel/PVC Coated

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

ROB PRLR19 1/2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PRLB989 3-1/2 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type LB Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type T Conduit Bodies