"wiremold"

Steel, 2" Radius Insert for Divided Flat Elbow, 4000 Series. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/4" Bend Radius, PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Die-cast aluminum construction with stamped steel bottom plate. Includes 3 duplex receptacle plates, 1 center communication plate and

Category: Round Recessed Floor Boxes

W-mold 2811fo-wh Flat Elbw Fo cat5 White

Category: 1-Piece Non-Metallic Raceway Elbows

TracJack Faceplate, six-port (dual gang), plastic, Wiremold Ivory

Category: Data Wallplates

Series II, one-port Clarity 5E,T568A/B, 180 degree, Wiremold Ivory

Category: Snap-In Cat 5e Jack Inserts

Two Gang Device Box. Cover has twistouts for 2000, 500 and 700 Series Raceways. Base has 1/2" trade size KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. Finish - Gray

Category: 2-Gang Raceway Switch & Receptacle Boxes

Series II, two-port Clarity 6,T568A/B, 180 degree, Wiremold Gray

Category: Multimedia Outlet System Wallplate Inserts

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color gray.

Category: Assembled Poke-Through Units

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard heights: 10' 2" (3.1m) (NP800C-10-2B), 12' 8" 3.9m) (NP800C-12-8B), 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

<p>Device plate used to blank off the center compartment, when no devices are used.</p>

Category: Recessed Compartment Box Covers

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum GFI receptacle cover plate, 5 1/2" (140mm) for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.

Category: Round Recessed Box Covers

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

POKE-THRU ASSY LESS JCT BOX BLACK

Category: Assembled Poke-Through Units

WMD DQFF20UST DQF FIELD WIRED

Category: Assembled Recessed Countertop Boxes

WMD RFBA6C30OG RFBA 6G 3.0 IN

Category: Recessed Compartment Boxes

WMD RFBADJ4LB DATA PLATE

Category: Recessed Compartment Box Device Plates

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). White Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 12' 5" (3.8m). Rs Adapt To Yourcurrent Or Future Work Environments..

Category: Steel Power Poles

Nm Ext. Elbow 300 Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Entrance End Fitting, 800 Series. Size: 4-1/4" Length, 1-7/16" Width, 1-1/2" Height. PVC, White.

Category: 2-Piece Non-Metallic Raceway End Fittings

Non-Metallic, Tee Fitting, 2900 Series. Size: 3-7/8" Length, 1-1/8" Width. PVC, White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings