"wiremold"

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color gray.

Category: Assembled Poke-Through Units

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard heights: 10' 2" (3.1m) (NP800C-10-2B), 12' 8" 3.9m) (NP800C-12-8B), 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

Brushed aluminum GFI receptacle cover plate, 5 1/2" (140mm) for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.

Category: Round Recessed Box Covers

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

<p>Device plate used to blank off the center compartment, when no devices are used.</p>

Category: Recessed Compartment Box Covers

3' Plugmold Multioutlet System with 6 single outlets 304 Stainless Steel

Category: Single Circuit Steel Plugmold

FLRPORT FLANGE W/INSERT BRONZE

Category: Square / Rectangle Recessed Box Covers

Round Furniture Feed Floor Box, 6 Inch, (2) 3/4" Knockouts and (1) 1-1/2" Knockout, Die Cast Aluminum

Category: Round Recessed Floor Boxes

10IN BLANK CONDUIT HOUSING

Category: Poke-Through Cover Assemblies

WMD ALDS4047F ALDS4000 SINGLE

Category: Large 2-Piece Metallic Raceway Cover Plates

WMD 77000N 8 OUTLET SURGE STR

Category: Heavy Duty Power Strips

For deep switches and receptacles. Base has two 1/2" trade size KOs. Larger gang boxes available by special order. Three-gang: 4 5/8" L x 6 1/2" W (117mm x 165mm). NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "VC" or the "WH" color suffix to "WHC" to denote the Canadian versions. White

Category: 3-Gang Raceway Device Boxes

Co-extruded design, smooth plastic finish with adhesive backing. Available in 6' (1.8m) lengths, packed 120' (36.6m) per carton. 2900 Series. Ivory Finish - White

Category: 1-Piece Non-Metallic Raceway

With two concentric 1/2" and 3/4" trade size KOs for conduit connections. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway End Fittings

.040" [1.0mm] Steel, 5' [1.5m] Lengths. Packed Ten 5' [1.5m] Lengths Of Base And cover Per Carton.

Category: Small 2-Piece Metallic Raceway Bases

RACKET PRO DIVIDER

Category: Recessed Floor Box Service Dividers

50' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

<p>Steel replacement cap for 2"" (51mm) IPS preset. Recessed to hold 3/8"" (9.5mm) concrete.</p>

Category: Recessed Floor Box Service Fittings

5' Steel Plugmold Multioutlet Strip with 10 single receptacles spaced 6"

Category: Single Circuit Steel Plugmold

Designed especially for use in the installation of signal system and alarm wiring. Base has 1/2" trade size KOs. Larger gang boxes available by special order. Two-gang: 4 3/4" L x 4 3/4" W (121mm x 121mm). Accepts NEMA double-gang standard faceplates. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "vc" or the "WH" color suffix to "WHC" to denote the Canadian versions. White

Category: 2-Gang Raceway Device Boxes

Conduit Housing Assembly, 1-1/2", Use On 8AT, 8ATC, and 8STC Series Devices.

Category: Recessed Floor Box Service Fittings

For deep extensions from existing wall boxes. Accepts NEMA single-gang standard faceplates. White

Category: 1-Gang Raceway Box Extension Adapters

Required for holding AL3300D5 Divider in place. Use one every 30" (762mm).

Category: Plugmold Clips, Couplings, & Adapters