"wiremold"

Holds up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" (70mm x 114mm)) device plates sold separately by others.

Category: Recessed Floor Box Service Fittings

Closes off raceway end runs. Can be used to feed raceway using 1/2" or 3/4" trade size conduit. Holes for conduit must be drilled. Use a step drill or other means. White

Category: 2-Piece Non-Metallic Raceway End Fittings

Flangeless Blank Cover Assembly, No Cut-Out, Color: Black, Material: Die-Cast Aluminum

Category: Square / Rectangle Recessed Box Covers

5' Plugmold Tamper-Resistant Multioutlet System Gray

Category: Single Circuit Tamper Proof Plugmold

Single-gang sectional (SD) width device plate.

Category: 1-Gang Raceway Device Brackets & Plates

Adapter Mounting Bezel, Accepts 3 Series II 1-Unit Inserts, Ivory

Category: Snap-In Wallplate Inserts

One-gang blank device plate in sectional widths.

Category: 1-Gang Raceway Device Brackets & Plates

Combination Carpet and Tile Flange, 1-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Accepts six Ortronics TracJack or three Series II datacom inserts. Both adapters included.

Category: Large 2-Piece Metallic Raceway Cover Plates

Set Screw Couplings, Use Two For Attaching In-Line Raceway Sections

Category: Plugmold Clips, Couplings, & Adapters

For carpet, tile and wood covered floors. For use in on-grade and above grade concrete floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available with an epoxy

Category: Square Recessed Floor Boxes

For horizontal mounting of standard single-gang devices. Accepts industry standard single-gang faceplates for electrical and communication devices.</p.

Category: Large 2-Piece Metallic Raceway Cover Plates

WMD V2000B-10 BASE 10 FT IVY

Category: Small 2-Piece Metallic Raceway Bases

Use with 5400TB Series Raceway. Available in 8' (2.44m) lengths, packed in 48' (14.6m) per carton. White

Category: 2-Piece Non-Metallic Raceway Covers

Closes off open ends of raceway.

Category: Large 2-Piece Metallic Raceway End Fittings

Half-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. For use on side compartments only.

Category: Poke-Through Mounting Plates

Combination Carpet and Tile Flange, 1-Gang, Powder-Coated Aluminum, Black

Category: Square / Rectangle Recessed Box Flanges

Makes 90 degree internal corners. Two AL2401 Couplings included.

Category: Small 2-Piece Metallic Raceway Elbows

Has 1 1/4", 1 1/2" and 2" trade size KOs in back and on each side. Ivory

Category: Large 2-Piece Metallic Raceway Elbows

Device plate that will accept up to four (4) Extron Electronics MAAP style plates in OFR48-2 and OFR48-4 Device Boxes.

Category: Metallic Overfloor Raceway Device Plates

Four-Gang Cover, Four Duplex Openings, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

For mounting devices 24" (610mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

W-mold G3040ce Sp Gry Switch plate

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, Base, 2000 Series. Size: 5' Length. .040 Steel, Ivory.

Category: Small 2-Piece Metallic Raceway Bases