"wiremold"

Six outlets, putty white aluminum housing, 15A, lighted switch. 6' (1.8m) 14/3 SJT putty white cord with NEMA5-15 plug. Length 12 1/4" (311mm). Receptacle center-to-center 1 1/4" (32mm). Snap-on, slide-off mounting.

Category: General Duty Power Strips

Two-Compartment Extender Mounts onto Existing 25DTP or 25DTC Series Pole, Nominal Material Thickness: 0.04" (1.0mm), Furnished Unwired without Outlets, Use Existing Pole Mounting Hardware, Entrance End Plate and Ceiling Trim Plate, Available in 5' (1.524m) Length, Can Be Cut to Desired Length, Finish - Ivory

Category: Steel Power Poles

For mounting one or two keystone device modules, recessed to provide a flush installation. Has one opening and one KO. White

Category: 1-Gang Raceway Box Covers & Faceplates

Closes off open end of S4000 Base. Use when end feeds are required for an installation. Includes two 1/2" - 3/4" trade size KOs and two No. 10-32 ground terminals.

Category: Large 2-Piece Metallic Raceway End Fittings

Designed especially for use in the installation of signal system and alarm wiring. Base has 1/2" trade size KOs. Larger gang boxes available by special order. Three-gang: 4 5/8" L x 6 1/2" W (117mm x 165mm). NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "vc" or the "WH" color suffix to "WHC" to denote the Canadian versions.

Category: 3-Gang Raceway Device Boxes

Device plate for 8in and 10in poke thru units that will accept either decorator, GFCI, 106 style devices for power and audio/video applications. Finish - Designer Ivory

Category: Square / Rectangle Recessed Box Flanges

Communication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. Opening dimension is 9/16" x 3/4" (14.3mm x 19.1mm). NOTE: For use with RFB4-CI-1 only.

Category: Recessed Floor Box Service Fittings

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

Die-cast aluminum construction with stamped steel bottom plate. Includes 3 duplex receptacle plates, 1 center communication plate and

Category: Round Recessed Floor Boxes

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/4" Bend Radius, PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

W-mold 2811fo-wh Flat Elbw Fo cat5 White

Category: 1-Piece Non-Metallic Raceway Elbows

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

MTO 12 IN COVER (1) GFI/SURGE PROVISION

Category: Recessed Floor Box Service Fittings

WMD XB814CLVGY EXTERIOR BX CV

Category: Recessed Compartment Boxes

WMD 4ATCP2RBZ 4IN PREWIRED-SU

Category: Assembled Poke-Through Units

6IN PRWRD FLUSH BRONZE ASSEMBLY

Category: Assembled Poke-Through Units

Two Gang Device Box. Cover has twistouts for 2000, 500 and 700 Series Raceways. Base has 1/2" trade size KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. Finish - Gray

Category: 2-Gang Raceway Switch & Receptacle Boxes

2-Gang Shallow Floor Box

Category: Recessed Compartment Boxes

WMD 25DTP-B-WH

Category: Steel Power Poles

Steel, External Corner, 3000 Series. Size: 4" Length, 1-1/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Single Receptacle Cover Plate – 2.13" [54mm] diameter. For straight blade or locking single receptacles. Mounts commercially available straight blade or locking single receptacles with face diameters of 2.13" (52mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Service Box Plate, Metallic, Type: Decorator/GFCI Receptacle. For use with 525 Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Duplex Receptacle. For use with 525 Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Two-compartment pole. Nominal material thickness .050" [1.8mm].Furnished unwired without outlets.Two 8" [203mm] removable covers with KOs for modular jacks and modular furniture communication outlets. Mounting hardware, entrance end plate, and ceiling trim plates furnished. Length: 10'5"

Category: Aluminum Power Poles