"wiremold"

Full capacity 90 degree flat corner used in divided or undivided applications. Provides 2" (51mm) bend radius control for UTP, STP and fiber optic installations. Ideal for new installation when the cable is lay-in or pull-through. Gray

Category: Large 2-Piece Metallic Raceway Elbows

Brushed aluminum communication cover plate. Allows for up to four communication devices to be mounted in a recessed position within the 880S and 880CS Floor Boxes. Has removable slides for cable egress. NOTE: Not for use with 817C, 827C, and 837C Flanges.

Category: Recessed Floor Box Service Fittings

For covering rectangular decorator style devices. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Available in 5' (1.5m) length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral and insulated ground conductor). .040" (1.0 mm) steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 Amps (shared between two ports) 5VDC. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product. Finish - 304 Stainless Steel

Category: Single Circuit Tamper Proof Plugmold

Floor Box Cover Kit, Includes Flange and Slide Holder, (1) Pre-Wired 20A Duplex Receptacle, Black

Category: Round Recessed Box Covers

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes combination twistouts for either modular furniture adapter or two Keystone RJ45s. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 4-Gang Raceway Box Covers

WMD WH2000C STL RACEWAY COVER

Category: Small 2-Piece Metallic Raceway Covers

For mounting devices 12" (305mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

Combination Carpet and Tile Flange, 2-Gang, Powder-Coated Aluminum, Brass

Category: Square / Rectangle Recessed Box Flanges

Accepts 15A and 20A duplex receptacles and 106 style frames. Two duplex openings. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Finish - Ivory

Category: 4-Gang Raceway Box Covers

Covers gap when external corner is made by notching and bending 2000B Base. Continues raceway runs around outside corners. White

Category: Plugmold Elbows

One and a half-gang 2" trade size conduit housing assembly. Recommended for use with furniture feed devices (6ATCFF). Covers the center compartment and one of the side compartments.

Category: Poke-Through Mounting Plates

Steel, Wire Clip, Spring Steel, AL3000 Series.

Category: Metallic Raceway Connectors & Adapters

Used to close off unused gangs. NOTE: For use with RFB4E, RFB6 and RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

One-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

WMD WD350-CA Coupling Angles (2), 3-3/16" Height, 1-1/2" Length, Assembly Screws Included

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Surface Style Floor Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

Cover Plate, UL Listed, 2-Gang, Gray, See Picture. 1: Combination Modular Furniture & 2 Keystone Twist Out, 2: Blank

Category: 2-Gang Raceway Box Covers

1.40" (35.40mm) Installs commercially available straight blade and locking single receptacle with face diameters of 1.38" - 1.39" (36mm - 37mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Hold up to five (5) devices for power, communications or audio/video. Bracket accepts EFB10 Series device plates (2 1/32" x 4 5/8") (58mm x 117mm) device plates sold separately.

Category: Recessed Floor Box Service Fittings

For right angles turns around external corners. White

Category: 2-Piece Non-Metallic Raceway Elbows

Touch-Up Paint, Gray, 0.3 Ounce Pen

Category: Touch Up Paint

Steel, External Elbow, 1500 Series. Size: 2-1/2". Ivory.

Category: Metallic Overfloor Raceway Elbows

Covers seams where two lengths of 2000 Series Raceway come together. Stainless Steel

Category: Plugmold Clips, Couplings, & Adapters