"wiremold"

WIREMOLD PA120T SENTREX SURGE

Category: Panel Mount Surge Protection Devices

MLX MUS-X230-WD5 CUST WIREMOLD IVRY FASCIA FITS CM2 2 KSJ

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Ivory

For 881 PVC Floor Box. Kit complete with flange, slide holder, 881 adapter, (1) one Wiremold Open System unloaded adapter, Ortronics Series II and TracJack adapters. Holds up to eight (8) ports of communication devices. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm). Not for use when concrete is the finished floor. Use only for tile, carpet and wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Black

For 881 PVC Floor Box. Kit complete with one (1) 20A duplex 881AV3CTCBS receptacle, (receptacle can be wired as standard receptacle or isolated ground), flange and slide holder, 881ADP Adapter and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapter, Ortronics® Series II and TracJack adapters and Extron® Electronics MAAP adapter. CAUTION: Not for use on concrete pours less than 4 1/2" [114mm]. Not for use when concrete is the finished floor. Use only for tile, carpet and

WIREMOLD 2415FO-FW FIBERREADY TEE FOG WHITE

WIREMOLD MAB-6TJ-WH

For 881 PVC Floor Box. Kit complete with flange, slide holder, 881 adapter, (1) one Wiremold Open System unloaded adapter, Ortronics® Series II and TracJack adapters. Holds up to eight (8) ports of communication devices. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" [114mm]. Not for use when concrete is the finished floor. Use only for tile, carpet and wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket

WIREMOLD APMT12TM2, 12" Modular Track, One Outlet Module, One Blank Module.

WIREMOLD APCB1TM4 CONTROL BOX WITH PADDLE DIMMER

For 881 PVC Floor Box. Kit complete with one (1) 20A duplex 881AV3CTCBS receptacle, (receptacle can be wired as standard receptacle or isolated ground), flange and slide holder, 881ADP Adapter and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapter, Ortronics® Series II and TracJack adapters and Extron® Electronics MAAP adapter. CAUTION: Not for use on concrete pours less than 4 1/2" [114mm]. Not for use when concrete is the finished floor. Use only for tile, carpet and

OUTDR CS POWER 3G R1R1U BZ

Floor Box Surface Cover With Carpet Insert, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For Use With: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Black

Category: Square / Rectangle Recessed Box Covers

Aluminum, Flush Style Cover with Solid Lid, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. For use with: Evolution Series 6, 8, and 10-gang Floor Boxes. Black

Category: Square / Rectangle Recessed Box Covers

4-1/4" Round Cover, Metallic, Cover Type: Single Service (1" Opening). Device Type: Single Receptacle or Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

4-1/4" Round Cover, Metallic, Cover Type: Single Service (2-1/4" Opening). Device Type: Single Receptacle or Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

9.75" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Round Recessed Box Covers

8-Inch Cover Assembly Flush, Bronze

Category: Poke-Through Cover Assemblies

6" Round Cover, Recessed, Evolution 6AT Series, Surface6" Round, Poke-Thru Cover Assembly, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, Laminate and Wood Flooring.

Category: Poke-Through Cover Assemblies

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Ivory Finish Flange Ivory Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, Laminate and Wood Flooring.

Category: Poke-Through Cover Assemblies

Round Cover Assembly, Diameter: 8", Metallic, Cover Type: SurfaceRound Cover Assembly, Diameter: 8", Evolution Series, Metallic, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Poke-Through Cover Assemblies

Poke-Thru Assembly, Diameter: 8", Type: (2) Duplex, Aluminum CoverPoke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 8". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units