"wiremold"

Single Gang Plate, 1 Inch Knockout, Steel

Category: Recessed Floor Box Service Fittings

Two-gang powder-coated aluminum combination carpet and tile flange, 6" x 9" (152.4mm x 228.6mm). Accepts Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series Open System inserts, sold separately. NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Bronze

Category: Square / Rectangle Recessed Box Flanges

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

Category: Round Recessed Box Covers

Floor Box Cover, 1-Gang, Non-Metallic, Accepts three (3) 2A Activate inserts.

Category: Recessed Floor Box Service Fittings

TOP PLATE 1 ORT BEZEL

Category: Recessed Compartment Box Device Plates

Two equal compartments - Base accepts single or Twin Snap Cover. 5400 Series raceway is available in 8' (2.4m) lengths with pre-punched mounting holes, packed 48' (14.6m) per carton. White

Category: 2-Piece Non-Metallic Raceway

Poke-Thru Device, Flush, Assembled Unit, AV3 Series, Nonmetallic, Cover: Black, Flange: Painted Aluminum, Diameter: 8-1/4". Depth: 16-3/4", Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), Accepts: Up To (4) Data/AV Ports. For Use with Carpet, Wood & Tile Flooring.

Category: Assembled Poke-Through Units

Feeds OFR Series Raceway. Has two (2) concentric 1/2" and 1 1/4" trade size KOs on end. Includes removable divider that can be positioned to feed any raceway channel. Can be used to feed raceway from wall or into furniture.

Category: Metallic Overfloor Raceway Connectors & Adapters

2-Gang, Upper Panel Device Plate, Metallic, Device Type: Duplex Receptacle. For use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

Non-Metallic, 6A, Mini Adapter Bezel Opening. Gray.

Category: 1-Gang Raceway Box Extension Adapters

Adjustable Floor Box, 1-Gang, Depth: 3-7/16". Cubic Inches: 48". Knockouts: (4) 1". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour), Cast Iron

Category: Recessed Adjustable Floor Boxes

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

Slide Holder Assembly, Nonmetallic, Brass Powder-Coat, For Use with Tile or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Non-Metallic, External Elbow, PN05 Series, Size: 1-5/8" Length, PVC, White

Category: 2-Piece Non-Metallic Raceway Elbows

Floor Box, 4-Gang, 12-1/8 x 8-7/16 x 5-7/8 Inch, Protective Cover, (1) EFB8-MB Mounting Bracket, (1) Back Plate, (2) End Caps, (1) EFB810-DIV Divider, (1)EFB810 3/4"-1 1/4" Knockout Plate, (1)EFB810 2" Knockout Plate, Trade Size Knockouts 3/4 - 2 Inch ** If installed on bare concrete or terrazzo floors EFB45-CTR and EFB45-CLL are sold separately.**

Category: Square Recessed Floor Boxes

Unit includes one (1) 20A black tamper-resistant duplex receptacle. Second opening will accept adapter for one (1) Wiremold CM Series Open System 2A module, one (1) Ortronics Series II or one (1) TracJack adapter to accommodate a wide range of communication outlets. Adapters are included in hardware bag. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

For carpet, tile and wood covered floors. For use in concrete, raised and wood floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available in a standard version for use in above grade concrete, raised, and wood floor applications. Boxes are also compatible with Wiremold Walkerflex Modular Wiring System. Custom options are available upon request. NOTE: Not designed for use with bare concrete or terrazzo floors.

Category: Recessed Adjustable Floor Boxes

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 1/2 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Internal Communication Bracket, (4) Keystone Opening, Dimension: 9/16 Inch x 3/4 Inch, Metallic Dimension: 9/16 in x 3/4 in

Category: Recessed Floor Box Service Fittings

2-Gang, Upper Panel Device Plate, Metallic, Device Type: Blank. For use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

3-Compartment Combination Box, Metallic, Depth: 5", Length: 8-3/4", Width: 6-3/4". Raised Floorbox, Series AF, Color: Black Tile Cover & Trim.

Category: Recessed Compartment Boxes

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Black

Category: Square / Rectangle Recessed Box Covers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies