"wiremold"

Poke-Thru Device, Assembled, RC7 Series, Black Non-Metallic Cover, Includes 20 Amp Duplex Receptacle and (2) Cat 6 Keystone Connectors

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Quad Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade), (2) Openings for Pass Through Capability for 4-Pair Cat 5e or Cat 6 Cable. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Floor Box, 2 Gang, On Grade Type, 3 Inch Depth, (14) Knockouts 1, 3/4, and 1-1/4 Inch, Steel

Category: Square Recessed Floor Boxes

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Fog White

Category: Communication Module End Plates For Metallic Raceway

Single Gang Cover 3 Seriesii Insert

Category: Recessed Floor Box Service Fittings

Aluminum housing and side plates, with a steel base and divider, measures 4" x 5" x 5 5/8". Base is configurable to have a combination of two 3/4" knockouts or two 3/4" EMT stubs. Accommodates a variety of power outlets (duplex, decorator, GFCI and up to 30A twist lock). Use Wiremold AVIP to provide communications and A/V. Receptacles and wall plates are sold separately.

Category: Recessed Floor Box Service Fittings

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: White.

Category: 2-Piece Non-Metallic Raceway Covers

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

Steel, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (6) 15A, 125V: Dual Circuit, Single Outlets

Category: Dual Circuit Steel Plugmold

Steel, Combination Connector, 500, 700 Series. Size: 1-3/8" Width, 3" Length, 1-5/16" Height, 1/2" Trade KO. White.

Category: Metallic Raceway Connectors & Adapters

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes mini adapter that accepts Pass and Seymour Activate inserts or Wiremold Open System communications modules. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 4-Gang Raceway Box Covers

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

1/2" trade size KOs located on end, sides, and bottom of fitting. 3/4" KOs on bottom and rear. Includes ground screw. Gray

Category: Small 2-Piece Metallic Raceway End Fittings

Device Plate, 1-Gang, Accepts (3) Ortronics TracJack Inserts

Category: Recessed Floor Box Service Fittings

Internal Duplex Receptacle Bracket, Accepts 15A & 20A Duplex Receptacles

Category: Recessed Floor Box Service Fittings

SS BRKT W/TWO 2A MINI BEZELS

Category: Recessed Floor Box Service Fittings

AV3 Poke-Thru Abandonment Plate, Nonmetallic, Material/Finish: Polycarbonate/Black

Category: Round Recessed Box Covers

Single-gang device plate that will accept up to six (6) ports of communication devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Single Gang Plate, 1 Inch Knockout, Steel

Category: Recessed Floor Box Service Fittings

Poke-Thru Abandonment Plug, 3 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

Floor Box, Rectangular, (4) Compartment, Depth: 5 Inch, 1/2 & 3/4 Inch Knockouts, Housing: Die Cast Aluminum, Gray Tile Lid.

Category: Recessed Compartment Boxes

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

Category: Round Recessed Box Covers

Floor Box Cover, 1-Gang, Non-Metallic, Accepts three (3) 2A Activate inserts.

Category: Recessed Floor Box Service Fittings