Search results

Fuse, 50 Amp Class J Dual-Element, Time-Delay, Permanent Fuse Indication, 600 Volt, LOW-PEAK

Category: Class J Power Fuses

Electrician's Pocket Knife, Material: Stainless Steel Blade, Anodized Aluminum Handle, Blade Length: 3-3/4", Open Length; 8", Wire Stripping Notches from Closed or Open Position, Position Lock, Pocket Clip.

Category: Folding & Lockback Knives

Male Disconnect, Nylon Fully Insulated, 16-14 AWG, .250" x .032" Tab, Blue

Category: Male Nylon Insulated Wire Disconnects

Liquidtight Connector, Straight, 1-1/2 Inch, Steel, For Use With Metallic Liquidtight Conduit

Category: Straight Steel Liquidtight Flex Connectors

Trunk Cable, Portrait Type, 240V AC, Connector Spacing: 4.2 ft. Order By Number of Connectors.

Category: Solar Micro Inverter Components

Non-Metallic Sheathed Cable Connector, Two Screw, Straight, Knockout 2-1/2 Inch, Malleable Iron with Zinc Plating

Category: Iron NM Cable Connectors

Weatherproof Cover, 1-Gang, Rectangular Cluster Cover with (1) 1/2" Outlet, Vertical/Horizontal Mount, Die Cast, Gray.

Category: 1-Gang Metallic Weatherproof Box Covers

2-Gang, FDC Type, Malleable Iron Ridge Top, Cast Box. Hub Size: 3/4 Inch. Box Depth: 2.69 Inch Includes: Internal Ground Screw. For use with Threaded Rigid Metal Conduit.

Category: 2-Gang Malleable Iron FS & FD Device Boxes

Test Leads, Maximum Rating: 10A AC/DC & 1000V AC/DC, Features: Extendable Tip Shroud

Category: Test Lead Sets

20 Amp, 1-Pole, Miniature Industrial Circuit Breaker, Type BAB, Quicklag, Bolt-On, 10 kAIC, 120/240 VAC

Category: 1-Pole 120/240V Bolt-On Circuit Breakers

EMT Compression Connector, 1-1/4 Inch Diameter, Raintight and Concrete Tight, Steel

Category: Steel Raintight EMT Compression Connectors

Junction Box, NEMA 4X, Hinged Cover, 8 x 6 x 4 Inch, Stainless Steel Type 304

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Standard Strut Strap, Diameter: 1/2", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Post Base, 4 Holes Bottom Plate, Bolt Hole Diameter 9/16 in, Square, Material: Stainless Steel, Use with PS 200, 210

Category: Post Base Strut Channel Connectors

Eaton Bussmann series FRS-R fuse, 600 Vac, 300 Vdc, 350A, 200 kAIC at 600 Vac, 20 kAIC at 300 Vdc, Non Indicating, Current-limiting, time delay, Blade end X blade end, Class RK5

Category: Class RK5 Power Fuses

Chase Nipple, 1/2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Chase Nipples

Rigid Compression Coupling, 3/4 Inch, Concrete Tight, Malleable Iron/Steel, For Use with Threadless Rigid/IMC Conduit

Category: Rigid Compression Couplings - Iron

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Black, Shrink Ratio: 2:1, Size: 1-1/2", Expanded Insulation Diameter: 1-1/2", Recovered Insulation Diameter: 3/4", Tube Length: 48 Inch Piece. Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Narrow Slot Wire Duct, H x W x L: 2" x 2" x 6', Gray, 5mm Slots, Item Does Not Include Cover ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: High Density Wire Duct

Resin, Direct Burial Connector Sealing. Resin Is A 2-Part Epoxy Insulating And Encapsulating Resin. For Use With 3M Scotchcast O/B, R/Y, Y, R, G, B, 3M 212, 312 Or 512 Electrical Spring Connector

Category: Insulating & Sealing Compound

Box Adapter, 1-1/4" Inch Diameter, PVC, Gray

Category: PVC Box Adapters

Drywall Screw, Phillips Bugle Head, Size: #6 x 1-1/4". Coarse Thread, Wood Rockets - Yellow Zinc. Package Quantity: 500. *Dottie Part # 16216.*

Category: Coarse Thread Drywall Screws

Locknut, Size: 3/4 Inch, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Locknuts

Cable Tie, Heavy Cross Section, 30.6" Long, .350" Wide, .078" Thick, Straight Tip, Weather Resistant UV Rated Nylon, Black, 175lb Tensile Strength, 9" Max Bundle Diameter, 50/Pack

Category: Non-Releasable Cable Ties