"wiremold"

Poke-Thru Device, 6 Inch Diameter, Evolution Series, Cover and Stem are Pre-Assembled, Aluminum Cover

Category: Assembled Poke-Through Units

Steel, 2-Gang, Duplex Receptacle Cover, 4000 Series. Size: 5-1/8" Length. Gray.

Category: 2-Gang Raceway Box Covers

Unit is 13" [330.2 mm] and has one 15A gray duplex with adapter for Ortronics TracJack & Series II or Wiremold open system. Does not have communication opening. NOTE: Accommodates surface thicknesses from 0.7" to 1.9" [18mm to 48mm].

Category: Work Surface Power Centers

20 Amp Duplex Receptacle 2400 Series Raceway, Ivory, 3-Wire, 125 Volt, NEMA 5-20R

Category: 1-Gang Raceway Duplex Receptacles

Adjustable Floor Box, 1-Gang, Depth: 3-7/16". Cubic Inches: 48". Knockouts: (4) 1". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour), Cast Iron

Category: Recessed Adjustable Floor Boxes

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 1/2 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

For feeding raceway, has concentric 1/2" and 3/4" trade size knockouts.

Category: Large 2-Piece Metallic Raceway End Fittings

Blanking Top Plate. Diameter: 3-1/2". Stainless Steel. For use with: 2" IPS.

Category: Round Recessed Box Covers

Desktop Power Center. Color: Black. Receptacles: (3) 15 Amp, 125V, NEMA 5-15R. Additional: (2) USB Outlets. (6') Power Cord.

Category: Work Surface Power Centers

Aluminum, Base, AL Series. Size: 5' Length. .060 Aluminum.

Category: Small 2-Piece Metallic Raceway Bases

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

Accepts up to three (3) dual Wiremold Open System communication adapters. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

For AC8850 Box. Includes one (2) Wiremold CM Series Open System adapters. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

4000 Series Raceway Steel Cover, Gray, 5' (Also Compatible with 6000 Base)

Category: Large 2-Piece Metallic Raceway Covers

For installing Wiremold CM2 Series inserts and Activate connectivity inserts. Provides flush installation. Includes 6A CM-MAB adapter.

Category: Metallic Raceway Connectors & Adapters

WIREMOLD MAB-6TJ-WH

Cover Plate Flange, 1-Gang, Metallic, Brass. W x L: 4-3/4 x 5-3/4 Inch. For Use on: 880S1, 880M1, 880CS1-1, 880CM1-1 Floor Boxes in Carpet Applications.

Category: Square / Rectangle Recessed Box Flanges

Tele-Power Pole, Steel, 20A, 125V, Length: 12'-5", White

Category: Steel Power Poles

For right angle turns around internal corners. Integral dividers provide 2" (51mm) cable bend radius for UTP and Fiber Optic installations. Ideal for lay-in or pull-through installations. White

Category: 2-Piece Non-Metallic Raceway Elbows

Cover Plate, 1-Gang, Type: 1/2" and 2" Screw Plugs, Includes Gasket and Screws, Aluminum

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, FiberReady 2" Radius Full Capacity Internal Elbow, 5400 Series. Size: 4" Diameter. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Duplex receptacle cover accepts one (1) Wiremold CM2 Series and 2A mini adapter (2A opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

For AC8850 and AC8105 Boxes. Includes three (3) 6A Wiremold CM Series Open System adapters. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

2A opening. Includes adapters for Ortronics TracJack, Series II, Wiremold CM2 Series inserts, Pass and Seymour Activate and other manufacturers.

Category: Large 2-Piece Metallic Raceway Cover Plates