"wiremold"

WIR V4046A STL COMB RCPT & TEL OUTLET CVR IV

DATA BRACKET KIT WITH ORT BEZELS

SRV FTG (2) DPLX PLT OPNGS

WIR 6B22E 60A 3-PH PDU, 208VAC/208VAC, 3 CBS

WMD 2186 DISC NO REPLACE CONN

Medium base lamp holder 660W, 250V. Black general purpose phenolic. Ivory

WIR ZE120Y ZONEMASTER 400 120/208V

WIR G4047-2AAJJ 4 GANG GRAY PLATE W/TWO 1.41" AND TWO 1.59" SINGLE ROUND RECEPTACLES

In-line transition from DS4000 Series Raceway to 4000 Series Raceway. Designer Ivory

WIR AL2416 CROSS ALUMINUM

WIR G4000C-5 STL RACEWAY COVER 5FT 4000 GRAY

WIR CP10-HLS 10INCH STL HORIZONAL ELBOW

WIR WD10W350-SES SWEEP ELBOW

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Mounts DS4000 Series Raceway around wall offsets and columns with maximum offset depth of 9" (229mm). Minimum Offset: 3" (76mm). Maximum Offset: 9 3/4" (235mm). Designer Ivory

2-GANG 2A MINI & BLANK

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Brass

WIR WD10W350-IL

WIR PR609 CG SRG 6 OUTLET WALL

WIR ZBM277Y ZONEMASTER 200

IMB/RJ BRACKET

WAL S39CCTCBK CVR ASSY

WAL S39BBTCBS CVR ASSY

REC ACTVN BLANK CVR BRASS COAT