"wiremold"

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Gray

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat.

Category: Poke-Through Cover Assemblies

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

6IN CORE-UNWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Black

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Brass

Category: Assembled Poke-Through Units

6IN CORE-PREWIRED6IN CORE-PREWIRED

Category: Assembled Poke-Through Units

Recessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (GY) painted gray."

Category: Assembled Poke-Through Units

6' Aluminum Plugmold Multioutlet System comprised of twelve 6 inches apart, GBA Finish - Satin Anodized Aluminum

Category: Single Circuit Aluminum Plugmold

5' Aluminum Plugmold Multioutlet System comprised of 5 spaced at 12", GB Finish - Satin Anodized Aluminum

Category: Single Circuit Aluminum Plugmold

Aluminum surface style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

WMD APMT12W2 ADORNE 12IN MODU

Category: Undercabinet LED Lighting

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Anodized Aluminum

Category: Square / Rectangle Recessed Box Covers

Coupling, Galvanized Steel Plated, 1-1/2" x 2-1/2", For Joining Lengths of G4000B, Gray, 1 Pair

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

8in Core-unwired-surface GrayWlk 8atcgy 8in Core-unwired-s

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat.

Category: Poke-Through Cover Assemblies

WMD ECB2SP CEILING BOX BASE M

Category: Media Center Enclosures with Covers

Flush Brass Power Cover Plate Only (Flip Lid) With Four Mounting Screws

Category: Round Recessed Box Covers

Wlk 862tgfi Floor Box W/895tg

Category: Assembled Recessed Round Boxes

BARRIER KIT PK PRESET

Category: Recessed Floor Box Service Dividers

4IN COVER ASSEMBLY SURFACE NK

Category: Poke-Through Cover Assemblies

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Aluminum

Category: Assembled Poke-Through Units

STL RACEWAY BASE 10FT

Category: Large 2-Piece Metallic Raceway Bases

Cvr Assy-painted Black-w/cutoutsCvr Assy-painted Black-w/cutouts