"wiremold"

Floor Box Surface Cover With Carpet Insert, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For Use With: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover Kit, 1-Gang, Multi-Device Type, Non-Metallic1-Gang, Floor Box Cover, Metallic, Cover Type: Lift Door. Device Type: Decorator/GFCI Receptacle. Brass.

Category: Square / Rectangle Recessed Box Covers

WMD FS4RWP12 4IN RETROFIT KIT

Category: Square / Rectangle Recessed Box Covers

Wireless Ceiling Enclosure 24x24x04

Category: Indoor Wall Mount Data, Audio, & Video Enclosures

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

Divided Tee Fitting, Two Pair of DS4001 Couplings Included, Color: Gray

Category: Large 2-Piece Metallic Raceway Tee Fittings

Raceway Device Box, 1-Gang, 2-3/4" Deep, IvoryRaceway Device Box, 1-Gang, 2-3/4" Deep, Ivory, V2100 Series

Category: 1-Gang Raceway Device Boxes

6' GFCI Plugmold Multioutlet Tamper- Resistant System. Finish - Gray

Category: Single Circuit Tamper Proof Plugmold

Gray Tamper-resistant GFCISteel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

W-mold Al20ig606 3w 1ckt Plug mold

Category: Commercial Grade Power Strips

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

W-mold G20ig306 Gry 3w1ckt Pl ugmold

Category: Single Circuit Steel Plugmold

Two circuits with two 20A resettable circuit breakers. Twenty-four 20A outlets with T-slots, black housing. 12' (3.6m) cord. Length 48" (1.3m).

Category: General Duty Power Strips

Aluminum, Flush Style Cover with Carpet Insert, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. For use with: Evolution Series 6, 8, and 10-gang Floor Boxes. Gray

Category: Square / Rectangle Recessed Box Covers

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Aluminum Powder-Coat.

Category: Poke-Through Cover Assemblies

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

8IN CORE-PREWIRED-FLUSHWAL 8ATPGY 8IN CORE-PREWIRED-FLUSH

Category: Assembled Poke-Through Units

8IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Bronze

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Poke-Thru Assembly, Diameter: 6", Type: (2) Duplex, MetallicPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Aluminum, Flush Style Cover with Solid Lid, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. Brass

Category: Square / Rectangle Recessed Box Covers

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Brass

Category: Poke-Through Cover Assemblies

Installs 15A or 20A decorator style receptacles, GFCI and surge devices into DS4000 Series Raceway. Designer Gray

Category: 1-Gang Raceway Box Covers & Faceplates