"wiremold"

Floor Box Cover, 1-Gang, (2) Breakouts, Non-Metallic, Color: Black

Category: Square / Rectangle Recessed Box Covers

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft., Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Device plate that will accept up to four (4) ports of communications devices. Includes adapters for Ortronics TracJack, Series II, Pass and Seymour Activate inserts and Wiremold Open System communication modules.

Category: Metallic Overfloor Raceway Device Plates

Cover Plate, 1-Gang, Type: 1" and 2" Screw Plugs, Includes Gasket and Screws, Aluminum

Category: Square / Rectangle Recessed Box Covers

2-Gang, Floor Box, Depth: 3-7/16 Inch, (6) 1 Inch Conduit Openings, Cubic Inches: 94, Cast Iron

Category: Recessed Compartment Boxes

Upper Panel Device Plate, 1-Gang, Duplex Receptacle, Metallic. For Use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

Closes off open end of 2400D Series Raceway. Fog White.

Category: Small 2-Piece Metallic Raceway End Fittings

OFR Extron MAAP-2A Combo Device Plate, Steel. Combination Device Plate That Will Accept Up To Two (2) Extron Electronics MAAP-Style Plates and Up To Two (2) Ports of Communications Devices. Includes Adapters For Ortronics Tracjack, Series II, Pass and Seymour Activate Inserts and Wiremold Open System Communication Modules.

Category: Metallic Overfloor Raceway Device Plates

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Floor Box Cover, 1-Gang, Communication Cover Plate, Cover Type: Single Service (2-5/8 Inch or 1 Inch Opening), Device Type: Communication Cable, Brass

Category: Square / Rectangle Recessed Box Covers

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.

Category: Poke-Through Mounting Plates

WIREMOLD 6' PLUGMOLD 24" ON CENTER PKG OF 2(2=1) IVORY

Category: Single Circuit Steel Plugmold

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas. One Keystone Cat6 Jack.

Category: Poke-Through Mounting Plates

Keystone Jack Plate, Black, Wiremold Audio/Video Interface Plates (AVIP) Allow For A/V Connectivity in All Wiremold A/V Compatible Pathways. AVIP Series Device Plates are Metal and have Screwed-Down Connectors, Which Ensure a Secure Connection that Cannot be Easily Pulled-Out or Disconnected While in Use. Available in Data, Audio, and Video Versions, AVIP Series Device Plates Help You Stay Connected In Meeting and Training Rooms, Collaboration Spaces, or Work Areas.

Category: Poke-Through Mounting Plates

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas. Two RCA Female to BNC Female Adapters. Finish - Black

Category: Snap-In HDMI Jack Inserts

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Single Gang Cover for Tele-Power Pole, Steel, Ivory, Accepts up to 30 Amp Shallow-Style Device & Flushplate - G3007C Device Bracket Included

Category: Power Pole Covers

WIREMOLD 7712BCS SURGE STRIP

Category: Commercial Grade Power Strips

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

For mounting up to three power or communication devices at one location inline and offset with 5400 Series Raceway. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 3-Gang Raceway Device Brackets & Plates

For mounting up to three power and communication devices with the 5500 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Fiber storage loop. Accepts two CM2 size Wiremold Open System communication modules or Pass and Seymour Activate Series inserts. Compatible with Wiremold 400, 800, and 2300 Series Raceways.

Category: 2-Gang Raceway Device Brackets & Plates

Wiremold PN03L10V 10FT Ivory Latching Raceway

Category: 1-Piece Non-Metallic Raceway