"wiremold"

Non-Metallic, 1-Gang, Large Data Box, Series: Eclipse PN03, Pn05, PN10. Size: 3-5/8" Height, 2-7/8" Width, Color: Ivory. Surface Mount Box for Raceway or Standalone application. Accepts 1 front-loaded downward facing device

Category: 1-Gang Raceway Device Boxes

Nonmetallic Plugmold 6' in length with receptacles spaced 12" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

Unit includes one (1) 15A black tamper-resistant duplex receptacle. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

Includes dual-gang box, two 106 adapter with eight openings for communication devices, and nickel cover with four screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 3 1/4" W x 3 3/4" L x 3 7/8" D [83mm W x 95mm L x 98mm D] Device Plate: 4 7/8" W x 5 1/16" L [124mm W x 129mm L].

Category: Assembled Recessed Gang Boxes

Nonmetallic slide holder assembly. Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors. Black

Category: Poke-Through Cover Assemblies

Includes prewired 15A quad receptacle. Use with RC9C Series Covers to complete installation. NOTE: RC9 Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Twelve outlets, rugged gray aluminum housing, 15A, lighted switch, 15' (4.6m) 14/3 SJT black cord with NEMA5-15 plug. Length 72" (1.8m). Receptacle center-to-center 5 1/4" (133mm). Snap-on, slide-off mounting.

Category: Work Surface Power Centers

Aluminum, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Aluminum. Outlets (6") O/C: Total Outlets: (12) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

One-gang powder-coated aluminum tile flange, 4.5" x 3.5" (114mm x 89mm). For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes. NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Bronze

Category: Square / Rectangle Recessed Box Flanges

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (11) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 Foot. Ivory. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

120 Volt, 15 Amp, 6-Outlet Strip w/Switch, Medical/Dental Grade, 15 Feet 14-3 SJT Cord Length, Powder Coated Steel Housing - White.

Category: Medical Grade Power Strips

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 10 Inch Diameter, Aluminum With Gray Powder Coat Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Two-compartment extender mounts onto existing 25DTP or 25DTC Series pole. Nominal material thickness .040" (1.0mm). Furnished unwired without outlets. Use existing pole mounting hardware, entrance end plate and ceiling trim plate. Available in 5' (1.524m) length. Can be cut to desired length. Finish - Gray

Category: Steel Power Poles

Multi-Service Poke-Thru, Finish Flange & Slide Holder Assembly, RC3 Series, Color: Black. Diameter: 7-1/2". Includes: 2 Ortronics TracJack mounting Bezels, and 2 Ortonics Series II bezels.

Category: Assembled Poke-Through Units

20A configuration. Four outlets, white finish. 6' (1.8m) cord. Length 10 3/4" (237mm). Receptacle center-to-center 1 1/2" (38mm). cTUVus Listed as Medical Electrical Equipment. Suitable for use where Article 517 of the NEC requires Hospital Grade Outlets.

Category: Medical Grade Power Strips

90 degree tee connection at any point along a run of 4000 Series Raceway. Ivory

Includes dual-gang box, two 106 adapter with eight openings for communication devices, and brass cover with four screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 3 1/4" W x 3 3/4" L x 3 7/8" D [83mm W x 95mm L x 98mm D] Device Plate: 4 7/8" W x 5 1/16" L [124mm W x 129mm L].

Category: Assembled Recessed Gang Boxes

Cover Assembly, Surface Style, Solid, Material/Finish: Die Cast Aluminum/Brass, Insert Areas Allow for Tile or Carpet Cutouts to Match Finished Floor.

Category: Round Recessed Box Covers

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts. Finish - Ivory

Category: 2-Gang Raceway Device Boxes

Floor Box Assembly, Round, Type: 15 Amp Quad Receptacle, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Ivory, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Includes dual-gang box, one 15A tamper-resistant duplex receptacle, 106 adapter with four openings for communication devices, and brass cover with four screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 3 1/4" W x 3 3/4" L x 3 7/8" D

Category: Assembled Recessed Gang Boxes

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

ModPower Primary Unit, In Surface, Connect Up To Six Of Our Power Units Together To Create A System Of Power For Training Spaces, Workstations Or Flexible Spaces, (3) Straight Blade Tamper-Resistant Receptacles & (2) USB Ports (1 USB-A, 1 USB-C), 10 Ft. Cord Length, White

Category: Commercial Grade Power Strips