"wiremold"

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Seam Clip Fitting, DS4000 Series, Steel, Black, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Two-Compartment Pole, Nominal Material Thickness: 0.04" (1.0mm), Gray or Ivory Boot Base, Furnished, Unwired without Outlets, Mounting Hardware, Entrance End Plate and Ceiling Trim Plates Furnished, Length: 10' 4"

Category: Steel Power Poles

3-Wire 125V NEMA 5-20R receptacle. Includes 10 1/2" (267mm) pigtails and inline splice connectors. Fog White

Steel, Entrance End Fitting, V2400 Series. Size: 2-11/16" Length, 1-7/8" Width, 2-1/8" Height. Includes: 1/2", 3/4" Trade Size KOs, 1/2" Trade Size KO. Fog White.

Category: Small 2-Piece Metallic Raceway End Fittings

Single-gang device plate that will accept up to four (4) Legrand AVIP devices or Extron® Electronics MAAP style plates. Fits into any one (1) of the shaded areas shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Poke-Through Device, PreWired, 8 Inch Diameter, Includes: (2) TR 20A Duplex Receptacles, (1) 1/2 Inch Blank Gang Housing, (3) Gang pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider, Brushed Aluminum

Category: Assembled Poke-Through Units

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Ivory. Outlets (6") O/C: Total Outlets: (9) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

1-Gang, Floor Box, Metallic, Depth: 3-7/16". Cubic Inches: 53". Knockouts: (3) 1/2", (5) 3/4" & (2) 1". For use in Wood Floors.

Category: Square Recessed Floor Boxes

A radiused insert for the ALA3817 and ALA4817, ALA3817N, ALA4817N, ALA3818, and ALA4818 fittings to provide a bend radius of 2" (51mm) for Fiber Optic/Category 5e installations. The insert is ideal for new and retrofit applications whether the cable installation is lay-in or pull-through

Category: Metallic Raceway Clips & Couplings

Labor saving, over-the-raceway device bracket. Accepts 15A or 20A duplex receptacles or 106 style data frame. Fog White

Covers the seams where two lengths of 2400 Series Raceway come together (nonmetallic). Fog White

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Includes two (2) adapters to accept Ortronics TracJack devices, and two (2) adapters to accept Ortronics Series II devices (sold separately). NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

Raceway Fiber Bushing, 2600 Series, Steel, Protects Wires from Abrasion. Bushing Slips Into Open End of 2600 Where It Enters a Fitting

Category: Metallic Overfloor Raceway Clips & Couplings

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on

Category: Poke-Through Cover Assemblies

This box has a 5" (127mm) depth design and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Recessed Compartment Boxes

3-Gang, Floor Box, Metallic, Depth: 3-7/16". Cubic Inches: 68". Knockouts: (9) 1/2", (11) 3/4" & (2) 1". For use in Wood Floors.

Category: Square Recessed Floor Boxes

Makes transition from 40N2 Series Raceway to PN03, PN05 and PN10 Series Raceways. White

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

When using any of the 862 Series Floor Boxes in a concrete floor, this kit will provide a mud cap for the concrete pour, two 3/4" trade size conduit hubs, and a scrub water gasket. Not needed for wood floor installations.

Category: Recessed Floor Box Tools

Exterior-gang 1" trade size conduit service feed assembly. Designed to allow connection to 1" trade size conduit feed in one (1) of the four (4) exterior-gang locations.

Category: Recessed Floor Box Service Fittings

5" Round Cover, Non-Metallic, Cover Type: Slide. Device Type: Duplex Receptacle. Material/Finish: Polycarbonate/Gray. For use in Carpet and Tile Applications.

Category: Round Recessed Box Covers

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold